List the major characteristics of Disk System.

Characteristics of Disk Systems

Characteristic	Set of Parameters/Possible meanings
Head Motion	Fixed head (one per track) Movable head (one per surface)
Disk Portability	Non-removable disk Removable disk
Sides	Single-sided Double-sided
Platters	Single-platter Multiple-platter
Head Mechanism	Contact (floppy) Fixed gap Aerodynamic gap (Winchester)

56. How is evaluated the Disk Access Time... Disk Access Time is the main Characteristic of Disk Performance.

If removable heads are used and disk drive is operating, then to read/write, the head must be positioned at the desired track and at the beginning of the desired sector on that track. The time it takes to position the head at the track is known as seek time. In either case, The time it takes for the sector to reach the head is known as rotational latency. DiskAccess Time is equal to the sum of Seek time and Rotational Latency time. RAID (Six [seven] levels of RAID). The RAID scheme consists of six levels. These levels do not imply a hierarchical relationship but designate different design architectures that share three common characteristics:

RAID is a set of physical disk drives viewed by operating system as a single logical drive.

Data is distributed across the physical drives of an array.

Redundant disk capacity is used to store parity information, which guarantees data recoverability in case of a disk failure.

RAID systems of different levels differ by methods of realisation the second and the third characteristics.

58. How are sector positions within a track.. Data are transferred to and from the disk in blocks, accordingly data are stored in block-size regions known as sectors. To avoid imposing unreasonable precision requirements the adjacent sectors are separated by intra—track(record) gaps. In order to identify positions within a track there are must be starting points on the tracks and ways for identification the start and the end of each sector. These requirements are handled by means of control data recorded on the disk. Thus, the disk is formatted with some extra data used only by the disk driver, and they are not accessible to the user. In Fig. Winchester Disk Track Format each track contains 30 fixed-length sectors of 600 bytes each. Every sector holds 512 bytes data, plus control information useful to the disk controller.The ID field is a unique identifier or address used to locate a particular sector.The SYNCH byte is special bit pattern that determines the beginning of the field.The track number identifies a head, since this disk has multiple surfaces.The ID and data fields contain an error-detecting code (CRC).

60. Describe the process of Virtual Memory..

A virtual memory address translation method based on the concept of fixed length pages: each virtual address generated by the processor, whether it is for an instruction fetch or an operand fetch/store operation, is interpreted as virtual page number (high—order bits) followed by an offset (low-order bits) that specifies the location of a particular byte (or word) within a page. Information about the main memory location of each page is kept in a page table. This information includes the main memory address where the page is stored and the current status of the page. An area in the main memory that can hold one page is called a page frame. The starting address of the page table is kept in a page table base register.

Дата добавления: 2015-10-26