Читайте также: |
|
1 Robertsen, L., B. Lonnberg. Diffusion in
wood. Part 1. Theory and apparatus.
Pap. Puu., 1991; 73(6): 532–535.
2 Kazi, K.M.F., et al. A diffusion model
for the impregnation of lignocellulosic
materials. Tappi J., 1997; 80(11): 209–
219.
3 Liese,W. Der Feinbau der Hoftupfel bei
den Laubholzern. Holz Roh- und Werkstoff,
1957; 15(11): 449–453.
4 Laboratory, F.P., Wood Handbook –
Wood as an Engineering Material. Madison,
WI: USDA, 1999.
5 Weatherwax, R.C., H. Tarkow. Importance
of penetration and adsorption
compression of the displacement fluid.
Forest Prod. J., 1968; 18(7): 44–46.
6 Kollman, F.F.P., Cote, W.A. Jr. Principles
of Wood Science and Technology.
In: Solid Wood. Springer-Verlag: New
York, 1968, pp. 193–194, Vol. 1: Solid
Wood.
7 Nevell, T.P., S.H. Zeronian. Cellulose
Chemistry and Its Applications. Ellis Horwood:
Chichester, UK, 1985, p. 31.
8 Gullichsen, J., H. Kolehmainen,
H. Sundqvist. On the nonuniformity of
484 4 Chemical Pulping Processes
the kraft cook. Pap. Puu, 1992; 74(6):
486–490.
9 Worster, H.E., D.L. McCandless,
M.E. Bartels. Some effects of chip size
on kraft pulping of southern pine for
linerboard. In: Alkaline Pulping and Testing.
Dallas, Texas, 1976.
10 Colombo, P., et al., The influence of
thickness of chips on pulp properties in
kraft cooking. Svensk. Papperstidn., 1964;
67(12): 505–511.
11 Hatton, J.V., J.L. Keays. Effect of chip geometry
and moisture on yield and quality
of kraft pulps from western hemlock
and black spruce. Pulp Pap. Mag. Can.,
1973; 74(1): T11–T19.
12 Akhtaruzzamann, A.F.M., N.-E. Virkola.
Influence of chip dimensions in kraft
pulping. Part II. Present state and scope
of the study. Pap. Puu, 1979; 61(10):
629–634.
13 Farkas, J. The dimensions of chip in
kraft pulping. Papir Celulosa, 1965;
20(1): 11–14.
14 Hatton, J.V. Quality and kraft pulping
characteristics of residual chips. Tappi,
1975; 58(2): 110–114.
15 Fengel, D. The distribution of aqueous
solutions within wood. J. Polymer Sci.,
1971; 36: 141–152.
16 Miller, R.N., W.H. Swanson. Paper Trade
J., 1922; 74(15): 295–305.
17 Montigny, R.D., O. Maass. Forest Service
Bull., 1935: 87.
18 Woods, N.I. Determination of penetration
rates of liquid media into wood
using a quarts spiral balance. Part 2:
Water and a pre-treated spruce chip.
Pulp Paper Mag. Can., 1956; 57(4):
142–151.
19 Hart, J.S. The Va-Purge process in
chemical pulping. Tappi, 1954; 37(8):
331–335.
20 Malkov, S., et al. Efficiency of chip presteaming
– result of heating and air
escape processes. Nordic Pulp Paper Res.
J., 2002; 17(4): 420–426.
21 Flamm, E., H. Sadler. Die Durchtrankung
von Laub- und Nadelholzer. Das
Papier, 1963; 17(3): 94–106.
22 Nicholas, D.D., R.J. Thomas. Influence
of steaming on ultrastructure of bordered
pit membrane in loblolly pine.
Forest Prod. J., 1968; 18(1): 57.
23 Mouchot, N., A. Zoulalian. longitudinal
permeability and diffusivity of steam in
beech wood determined with a Wicke-
Kallenbach-cell. Holzforschung, 2002;
56(3): 318–326.
24 Stone, J.E. The penetrability of wood.
Pulp Paper Mag. Can., 1956; 57(7):
139–145.
25 Stamm, A.J. Diffusion and penetration
mechanism of liquids into wood. Pulp
Paper Mag. Can., 1953; 54(2): 54–63.
26 Olsson, T., et al. Study of the transverse
liquid flow paths in pine and spruce
using scanning electron microscopy.
J. Wood Sci., 2001; 47(2): 282–288.
27 Stone, J.E., H.V. Green. Penetration and
diffusion into hardwoods. Pulp Paper
Mag. Can., 1958; 59(10): 223–232.
28 Malkov, S., P. Tikka, J. Gullichsen.
Towards complete impregnation of
wood chips with aqueous solutions. Part
2. Studies on water penetration into
softwood chips. Pap. Puu, 2001; 83(6):
468–473.
29 Malkov, S., et al. Modelling the process
water penetration into softwood chips.
J. Pulp Paper Sci., 2003; 29(4): 137–143.
30 Minor, J.L., E.L. Springer. Improved
penetration of pulping reagents into
wood. Pap. Puu, 1993; 75(4): 241–246.
31 Liyama, K., A.F.A. Wallis. An improved
acetyl bromide procedure for determining
lignin in woods and wood pulps.
Wood Sci. Technol., 1988; 22: 271–280.
32 Malkov, S., P. Tikka, J. Gullichsen.
Towards complete impregnation of
wood chips with aqueous solutions.
Part 3. Black liquor penetration into
pine chips. Pap. Puu, 2001; 83(8):
605–609.
33 Malkov, S., P. Tikka, J. Gullichsen.
Towards complete impregnation of
wood chips with aqueous solutions. Part
4. Effects of front-end modifications in
displacement batch kraft pulping. Pap.
Puu, 2002; 84(8): 526–530.
34 McKibbins, S.W. Application of diffusion
theory to the washing of kraft
cooked wood chips. Tappi, 1960; 43(10):
801–805.
35 Crank, J. The Mathematics of Diffusion.
London: Clarendon Press, 1956.
References 485
36 Glasstone, S., K.J. Laidler, H. Eyring.
The Theory of Rate Processes. 1st edition.
New York: McGraw-Hill, 1941.
37 Behr, E.A., D.R. Briggs, F.N. Kaufert.
Diffusion of dissolved materials
through wood. J. Phys. Chem., 1953; 57:
476–480.
38 Christensen, G.N. Diffusion in wood.
II. The temperature coefficient of diffusion
through wood. Australian J. Appl.
Sci., 1951; 2(4): 430–439.
39 Talon, J. The diffusion of sodium hydroxide
in wood at a high pH as a function of
temperature and degree of pulping.Master
Thesis, North Carolina State University:
Raleigh, 1986.
40 Talton, J.H., R.H. Cornell. Diffusion of
sodium hydroxide in wood at high pH
as a function of temperature and the
extent of pulping. Tappi, 1987; 70(3):
115–118.
41 Constanza, V., et al. Diffusion and reaction
in isothermal pulping digesters.
Ind. Eng. Chem. Res., 2001; 40(18):
3965–3972.
42 Robertsen, L., B. Lonnberg. Diffusion in
wood. Part 2. The effects of concentration
and temperature. Pap. Puu, 1991;
73(7): 635–639.
43 Constanza, V., P. Constanza. Estimating
pure diffusion contributions in alkaline
pulping processes. Latin American Appl.
Res., 2002; 32: 151–159.
44 Stone, J.E. The effective capillary crosssectional
area of wood as a function of
pH. Tappi, 1957; 40(7): 539–541.
45 Hagglund, O. Examensarbete. Royal
Institute of Technology: Stockholm,
1959.
46 Backstrom, C. Examensarbete. Royal
Institute of Technology: Stockholm,
1960.
47 Heinigen, A.V. Lecture notes, Department
of Chemical Engineering. University
of New Brunswick: Fredricton, NB,
1993.
48 Tornqvist, M., T. Hurme,
J.B. Rosenholm. The concentration
dependence of the diffusion coefficient
in Pine, Birch and Spruce. Pap. Puu,
2001; 83(3): 204–209.
49 ASTM. Standard test methods for pore
size characteristics of membrane filters
by bubble point and mean flow pore
test. p. 316–386.
50 Hartler, N. Penetrierung und Diffusionsverhalten
bei Sulfatkochung. Pap.
Puu, 1962; 7: 365–374.
51 Michelsen, F.A. A dynamic mechanistic
model and model-based analysis of a
continuous Kamyr digester. In: Department
of Engineering Cybernetics. The
Norwegian Institute of Technology. University
of Trondheim: Trondheim, 1995,
p. 253.
52 Gustafson, R.R., et al. Theoretical
model of the kraft pulping process. Ind.
Eng. Chem. Process Des. Dev., 1983; 22:
87–96.
53 Li, J., A. Phoenix, J.M. MacLeod. Diffusion
of lignin macromolecules within
the fibre walls of kraft pulp. Part I:
Determination of the diffusion coefficient
under alkaline conditions. Can. J.
Chem. Eng., 1997; 75(2): 16–22.
54 Tornqvist, M., T. Hurme,
J.B. Rosenholm. The effect of pressure
steaming on the steady state ion diffusion
and drift speed in wood. Holzforschung,
2001; 55(4): 441–447.
55 Kazi, M.F.K. Impregnation: A key step of
biomass conversion processes. Universite
de Sherbrooke: Quebec, 1996.
56 Kazi, K.M.F., E. Chornet. A diffusion
model for the chemical impregnation of
hardwoods and its significance for rapid
steam treatments. Pap. Puu, 1998; 80(1):
41–48.
57 Backman, A. The influence of chip
thickness on yield of cellulose and pulp
quality during cooking with parallelepipedic
chips. Finnish Paper Timber J.,
1946; 28: 200–208.
58 Hartler, N., K. Ostberg. Impregnation
for the sulfate cook. Svensk. Papperstidn.,
1959; 62: 524–533.
59 Larocque, G.L., O. Maass. The influence
of penetration in the alkaline delignification
of wood. Can. J. Res., 1937; 15, B:
89–97.
60 Malkov, S., P. Tikka, R. Gustafson.
Towards complete impregnation of
wood chips with aqueous solutions. Part
5: Improving uniformity of kraft displacement
batch pulping. Pap. Puu,
2003; 85(4): 215–220.
486 4 Chemical Pulping Processes
61 Egas, A.P.V., et al., Experimental methodology
for heterogeneous studies in
pulping of wood. Ind. Eng. Chem. Res.,
2002; 41(10): 2529–2534.
62 Analysis of sode and sulfate black liquor
T625 cm-85, TAPPI Standard.
63 Santos, A., et al. Kinetik modelling of
kraft delignification of Eucalyptus globulus.
Ind. Eng. Chem. Res., 1997; 36:
4114–4125.
Дата добавления: 2015-10-21; просмотров: 97 | Нарушение авторских прав
<== предыдущая страница | | | следующая страница ==> |
Na2SO3 Na2CO3 NaOH | | | Section 4.2.4 |