Other mechanical components

We use removable seat for fast dismounting to provide easy access to the battery. Battery may be charged at home. Seat is made of composite materials, it is light and easy for mounting.

Our bike has carbon handlebar (its width is 750 mm) to allow sufficient control while driving and may be regulated for different drivers. We use Honda’s supports for rider, which are made of rigid aluminum, they are covered with a layer of rubber for holding the rider’s feet if road is jagged and sharp.

Electrics

Electric scheme of the bike includes:

1) power supply source – LiIon battery (46.8 V, 1.4 kW/h, 31.5 Ah);

2) power consumption element – motor-wheel with 1.7 kWt capacity;

3) ECU

4) light.

We built an electrical system to meet European Safety requirements. So we have chosen sealed Delphi Weatherpack and AMP Superseal connectors with suitable crimping instruments, crimp splices instead soldering to join wires.

All lights meet regulations and European standards. We used:

- Optics HELLA D80 with 55w halogen lamp

- 4 lamps with 12 LED lamps for directional front and rear, designed to reduce the energy consumption

- LED light with 16 lamps and power of 0.95 w

5 Speedict Mercury

The Mercury measures and records Speed, Current, Voltage, Cadence and Temperature over time, then uses these measurements to calculate the maximum Power (Watt), battery consumption (mAh). Real-time information like live and peak Current, live and used Voltage, current and maximum Power (Watt), as well as existing and consumed Capacity (mAh) is transmitted by Bluetooth technology. Bikers can use their cell-phones to read these data in real-time for their pleasure or to fine-tune their power system.

Function mode allows configurable function model through its on-board 4 I/O ports, in combination with Governor features it can provide riders’ needs on both safety and system utilization. For instance, it can configure Speedict Mercury to measure Pedal Cadence rate, matching cadence rate for power delivery, redefine throttle’s highest and lowest point and even configure to compliant with EN15194 standard.

The Mercury can save up to 12 hours of information. Bikers can download their logged data to their Android device and manage the data and performance charts in offline mode.

Features:

*	Measures and record Current, Voltage, Temperature, Speed, GPS, Time and Pedal Cadence
*	Real-time calculate the maximum Power (Watt), Capacity used (mAh), Voltage used (Voltage), Average Speed (MPH | Km/h), Trip Distance (Km), Trip Time and Pedal Cadence (RPM)
*	Display real-time information on Android smart device via Bluetooth transmission
*	Record and display online Map and GPS information with Android device
*	Display GPS Speed and online Map on Android phone with measured and calculated data
*	Governor on under Voltage, over Temperature
*	Throttle and PAS override for Current and Speed Throttle
*	Control start power to prevent motor from gear damage
*	Cadence matching and Throttle range re-define provide better power utilization
*	Massive built-in memory enables recording a continuous 12 hours of system data
*	Recorded data and performance charts on Android device
*	Synchronize record data to Android device for offline view
*	EN15194 for EPAC Compliant
*	Upload recorded data to cloud / the Internet for sharing and access any-time anywhere
*	Self-calibrate-able for both Voltage and Current via Android device
*	Rugged - handles 100A peak at 80V

Дата добавления: 2015-10-23