Студопедия
Случайная страница | ТОМ-1 | ТОМ-2 | ТОМ-3
АрхитектураБиологияГеографияДругоеИностранные языки
ИнформатикаИсторияКультураЛитератураМатематика
МедицинаМеханикаОбразованиеОхрана трудаПедагогика
ПолитикаПравоПрограммированиеПсихологияРелигия
СоциологияСпортСтроительствоФизикаФилософия
ФинансыХимияЭкологияЭкономикаЭлектроника

Replacement procedures

Do not allow the coolant container to get too low when filling, to avoid air from being drawn into the cooling system. | INSPECTION AFTER REMOVAL | OIL PRESSURE CHECK | Be sure to clean drain plug and install with new washer. | INSPECTION AFTER INSTALLATION | ENGINE MAINTENANCE (MR18DE) | When draining all of engine coolant in the system, open I | AIR CLEANER FILTER | Be sure to clean drain plug (2) and install with new washer. | Do not overfill. |


Читайте также:
  1. Account opening and customer identification procedures/data
  2. Communication procedures
  3. Field Monitoring Procedures—Air Sample
  4. From OE to modern times the English vocabulary has changed greatly. The changes were as follows: 1) losses of words; 2) losses of the meanings; 3) replacements; 4) additions.
  5. Full Title Development and Verification of Rotor Dynamic Calculation Procedures for Electromagnetic and Auxiliary Bearings Using IPM Test Rigs Tech Area / Field
  6. Modern hairdressing procedures
  7. Modern Hairdressing Procedures

1. Remove the glove box assembly. Refer to IP-11.

2. Compress the air conditioner filter (1) downward while sliding it to the RH side of the vehicle to release the upper pawl.

3. Move the bottom of air conditioner filter (1) upward as shown to release the bottom tab, then remove it.


WJIA2253E

F

 

G

 

H

 

I

 

J

 

K


 

 

SJIA0652E

 

4. Replace the air conditioner filter with new one and install the new filter in the A/C unit assembly. MA

CAUTION:

Make sure that the air conditioner filter lower tab is fully seated, and that the air conditioner upper pawl is locked into place securing the new filter into the A/C unit assembly.

M

5. Install the glove box assembly. Refer to IP-11.

EXHAUST SYSTEM

N
EXHAUST SYSTEM: Checking Exhaust System INFOID:0000000004683700

Check exhaust pipes, muffler and mounting for improper attachment,

leaks, cracks, damage or deterioration. O

• If necessary, repair or replace damaged parts.

 

 

P

 

 


CVT FLUID

Revision: October 2008


 

MA-37


SMA211A

 

2009 Versa


CVT FLUID: Checking CVT Fluid (RE0F08A) INFOID:0000000004803426

 

Дата добавления: 2015-11-16; просмотров: 69 | Нарушение авторских прав

<== предыдущая страница | следующая страница ==>
Never drop or shock it.| Always use lint free paper towels to wipe fluid off the CVT fluid level gauge.
mybiblioteka.su - 2015-2024 год. (0.005 сек.)