Читайте также:
|
DRIVE BELT
DRIVE BELT: Component INFOID:0000000004683270
| PBIC3137J | ||||||
| 1. | Generator | 2. | Drive belt auto–tensioner | 3. | Crankshaft pulley | |
| 4. A. | A/C compressor (models with A/C) Idler pulley (models without A/C) 5. Possible use range B. | Water pump Range when new drive belt is installed | 6. C. | Drive belt Indicator |
DRIVE BELT: Checking Drive Belts INFOID:0000000004683271
WARNING:
Be sure to perform this step when the engine is stopped.
• Make sure that the indicator (notch on fixed side) of drive belt auto-tensioner is within the possible use range (A).
NOTE:
• Check the drive belt auto-tensioner indication when the engine is cold.
• When new drive belt is installed, the indicator (notch on fixed side) should be within the range (B).
• Visually check entire drive belt for wear, damage or cracks.
• If the indicator (notch on fixed side) is out of the possible use range or belt is damaged, replace drive belt.
DRIVE BELT: Tension Adjustment INFOID:0000000004683272
Belt tension is not necessary, as it is automatically adjusted by drive belt auto-tensioner.
ENGINE COOLANT
ENGINE COOLANT: Inspection INFOID:0000000004683273
LEVEL CHECK
• 
Check if the reservoir tank engine coolant level is within the “MIN” to “MAX” range when engine is cool.
• Adjust the engine coolant level as necessary.
CHECKING COOLING SYSTEM FOR LEAKS
SMA412B
Revision: October 2008
MA-26
2009 Versa
To check for leaks, apply pressure to the cooling system using suit-
able tool and Tool. A
Tool number: EG17650301 (J-33984-A)
Testingpressure: 157 kPa (1.6 kg/cm2, 23 psi) WARNING:
Дата добавления: 2015-11-16; просмотров: 70 | Нарушение авторских прав
| <== предыдущая страница | | | следующая страница ==> |
| INSPECTION AFTER INSTALLATION | | | When draining all of engine coolant in the system, open I |