Студопедия
Случайная страница | ТОМ-1 | ТОМ-2 | ТОМ-3
АрхитектураБиологияГеографияДругоеИностранные языки
ИнформатикаИсторияКультураЛитератураМатематика
МедицинаМеханикаОбразованиеОхрана трудаПедагогика
ПолитикаПравоПрограммированиеПсихологияРелигия
СоциологияСпортСтроительствоФизикаФилософия
ФинансыХимияЭкологияЭкономикаЭлектроника

Air cleaner filter

RECOMMENDED FLUIDS AND LUBRICANTS | ENGINE MAINTENANCE (HR16DE) | CHECKING COOLING SYSTEM FOR LEAKS | Do not allow the coolant container to get too low when filling, to avoid air from being drawn into the cooling system. | INSPECTION AFTER REMOVAL | OIL PRESSURE CHECK | Be sure to clean drain plug and install with new washer. | INSPECTION AFTER INSTALLATION | ENGINE MAINTENANCE (MR18DE) | Never drop or shock it. |



SMA803A

H


AIR CLEANER FILTER: Component INFOID:0000000004683692

I

 

J

 

K

 

 

MA

 

 

M

 

 

N

 

O

 

P

 

 

  WBIA0770E
  1.   Air cleaner filter   2.   Holder   3.   Air cleaner cover  
4. Seal 5. Mass air flow sensor 6. Air duct  
7. PCV hose 8. Air duct (Inlet) 9. Air duct (Front)  

 


Revision: October 2008


MA-29


2009 Versa


10. Clip 11. Resonator 12. Grommet  
13. Air cleaner case A. To electric throttle control actuator   AIR CLEANER FILTER: Changing Air Cleaner Filter B. To rocker cover   INFOID:0000000004685431
REMOVAL      

1. Push the tabs (A) of both ends of the air cleaner cover (1) into the inside (B).

2. Pull up the air cleaner cover forward (C) and remove it.

 

 

PBIC3557J

 

3. Remove the air cleaner filter (1) and holder (2) assembly from the air cleaner case.

4. Remove the air cleaner filter (1) from the holder (2).

 

 


 

INSPECTION AFTER REMOVAL


PBIC3558J


It is necessary to replace it at the recommended intervals, more often under dusty driving conditions. Refer to MA-9.

 

 

INSTALLATION

Installation is in the reverse order of removal.

• Install the air cleaner cover (1) in the direction shown.

• Air cleaner filter (2)

• Holder (3)

 


ENGINE OIL


PBIC3559J


ENGINE OIL: Inspection INFOID:0000000004683694

 


Дата добавления: 2015-11-16; просмотров: 52 | Нарушение авторских прав


<== предыдущая страница | следующая страница ==>
When draining all of engine coolant in the system, open I| Be sure to clean drain plug (2) and install with new washer.

mybiblioteka.su - 2015-2024 год. (0.005 сек.)