About Global and Slot Functions

• If the function you select can be set independently for each Slot (A to D), the selected Slot LED flashes. To make settings for a specific Slot, select it by pressing the SLOT button.

• If the selected function is global for all Slots, the selected SLOT button is steadily lit. Which Slot is selected is then of no relevance for the setting.

Setting the Value

Once a function is selected, the value is set using the UP/DOWN buttons.

Exiting the Shift Functions Mode

To go back to the regular “play mode”, press the SHIFT button once again.

There is no need to store the Shift function settings. The settings will be stored automatically to the memory. However, some functions are always reset to default values when you turn off power (see the description of each Shift function for details).

Tune (Master Tune)

This function is used to tune the Nord Lead 2X to other instruments. ‘00’ is normal 440Hz tuning. Lower pitches are indicated by a dot to the right of the number and values higher than normal pitch are indicated without a dot. The values are in cents (hundreds of a semitone).

Out Mode

This function is used to set how the sound should be routed from the Slots to the Outputs. The Out Mode settings are global for the entire instrument, which means all Programs share the settings made here.

Nord Lead 2 has four outputs, labelled A-D. It might be a good idea to think of these outputs as two output pairs (A-B and C-D), because that is often how they are used.

Basically there are three possibilities for how a sound appears in the outputs:

• The first is that a Program appears with equal level at two outputs, which is what we refer to as mono.

• The second option is that the voices (the keys you play) appear alternating between the two outputs in an output pair (A-B or C-D). This we refer to as stereo. If you play chords in stereo mode, the sound will be spread out in the stereo image.

• When Unison is activated, more than one voice will be used each time you press a key, as described on page 60. If a Unison Program is played in stereo mode, each time you play a key you will get at least one voice at one output in a pair and at least one at the other, which will result in a “wide” stereo sound.

• The third option is that when playing several Programs at the same time, the different Programs appear separated on different outputs.

О функциях Global и Slot

• Если светодиод выбранного слота мигает, то выбранную функцию можно установить независимо для каждого слота (А-D). Для настройки параметров отдельного слота, нажмите кнопку нужного слота.

• Если кнопка выбранного слота горит постоянно, то выбранная функция является общей для всех слотов. Какой слот выбран для установки, не важно.

Установка значения

После того, как функция выбрана, значение устанавливается с помощью кнопок ▲▼.

Выход из режима функций Shift

Чтобы вернуться к обычному "режиму воспроизведения", нажмите кнопку SHIFT еще раз.

Нет необходимости сохранять настройки функции Shift. Они будут сохранены автоматически в памяти. Тем не менее, некоторые функции всегда сбрасываются на значения по умолчанию при выключении питания (см. описание каждой функции Shift).

Дата добавления: 2015-10-30