Motion detection area setting

& Volume control

■ 5.1 Motion detection area & Sensitivity setting

■ 5.2 Color control

■ 5.3 Volume control

5. Motion detection area setting, Color & Volume control.

1. Selection button

2. Channel selection

3. Apply the selected sensitivity to all channels

4. Motion detection area sensitivity control

5. Apply the selected color to all channel

6. Color control

7. Audio volume control

5.1. Motion detection area & Sensitivity setting

- Click the “Show grid” button after selecting a channel.

- Set the area by clicking mouse when grids are shown in the screen.

- Plural areas can be set.

- The ‘select all’ button sets all areas in the screen as the motion detection area.

- If the user wants to delete the motion detection areas partially, click the left button of the

mouse and drag in the area after positioning the cursor at the left end of “sensitivity”.

- The ‘delete all’ button deletes all motion detection areas.

- Motion detection sensitivity is higher as the cursor goes to right (red), and lower as it goes

to left (green).

5.2. Color control

- The user can control the brightness, contrast, hue, saturation while watching the video

data.

5.3. Volume control

- The user can control audio in, sound volume, & mic volume while listening the audio

status.

- Controlling volume here brings the same effect to the system as controlling in the OS.

6

Chapter

Дата добавления: 2015-08-27