|
Читайте также: |
MAIN MAST 203 Lower mast mm. 8 walnut
204 Topmast mm. 6 walnut
205 Topgallant mast mm. 4 walnut
FORE MAST 206 Lower mm. 8 walnut
207 Foretop mm.6 walnut
208 Topgallant mm.4 walnut
MIZZEN MAST 209 Lower mm.6 walnut
210 Top mm.4 walnut
MAST ACCESSORIES
211 Cheeks 2 mm.thick
212 Cheeks (fore)
213 Trestle-trees, top
214 Trestle-trees (fore), top
215 Trestle-trees
216 Cross-bars 2x2 mm. walnut
217 Pillows 2x2 mm. walnut
218 Platform (top) 1mm thick Main Mast
219 Platform 1 mm.thick Fore Mast
220 Platform 1 mm.thick Mizzen Mast
221 Top arch 1x2 mm walnut
222 Cleats 1x1 mm.walnut
223 Mast spacer 1x2 mm.walnut
224 Eyebolts (4703)
225 Rings (4000/04)
226 Rail columns 2x2 mm.walnut
227 Banister 1x5 mm. beechwood
228 Planking 1x3 mm.beechwood
229 Cap (large)
230 Cap
231 Acorns (4780/04)
232 Lashing thread black (4126/10)
233 Pin rack (4107)
BOWSPRIT
234 Bowsprit 8 mm. walnut
235 Jib boom 4 mm. walnut
236 Bowsprit cheeks
YARDS
237 Main 6 mm. walnut
238 Top 4 mm. walnut
239 Topgallant 3 mm. walnut
240 Mizzen 4 mm. walnut
241 Mizzen topsail 3 mm. walnut
242 Gaff 4 mm. walnut
243 Fore main 6 mm. walnut
244 Foretop 4 mm. walnut
245 Topgallant 3 mm. walnut
246 Studding-sail outrigger 2 mm.walnut
247 Spritsail 4 mm. walnut
YARD ACCESSORIES
248 Caff parrels (4383/06)
249 Eyebolts (4703)
250 Bumpkin guides (2835/03)
251 Parrels for trucks (4384/10)
252 Parrels with trucks (4384/06)
253 Rope for footrope (4124/05)
254 Thread for slings (4124/10)
255 Thread for bowsprit gammoning (4126/10)
PLANS TRANSLATION
DESIGN 2
FIG.1 Attaching the riggings to the deck
All technical designs are in full scale
P = Beginning rigging N.
> = Passage rigging N.
... = End rigging N.
(Tie the rigging to a pin-rail or cleat
MIZZEN MAST PIN RACK
(attach right and left riggings)
NOTE: The channels are not Illustrated for
Greater graphic clarity.
FIG.2 MAIN MAST PIN RACK FIG.3 FORE MAST PIN RACK FIG.4 BULWARK (internal view)
MASTING
Follow drawings and instructions on Design 3.
Construct the masts using the correct length for each, and taper them In the given manner. The upper parts of the main, lower, and top masts finish with a square section at the masthead. Apply the accessories (ex. lashings, blocks, etc.) before assembling the various parts of the masts and yards. Make sure the masts and yards are inclined correctly with respect to the deck and that the tops and the caps are parallel to the waterline. Position the masts and yards on the deck following the sequence given for mounting of the shrouds (see instructions for the rigging); glue the caps only after fixing the shrouds. Follow the sequence given in the figures to continue assembling the pieces. Read well all notes and designs. To position bases 198, 199, 200, modify accurately the holes in the deck by inserting the masts and determining the exact position of the bases.
FIC.1 MASTS AND YARDS
Mizzen Mast
Fore Mast
Main Mast
FIG.2 LIST OF SAILS
Дата добавления: 2015-11-16; просмотров: 54 | Нарушение авторских прав
| <== предыдущая страница | | | следующая страница ==> |
| Hawse-hole guards 1 mm. thick | | | A. MEDICINES FOR INTERNAL USE |