Студопедия
Случайная страница | ТОМ-1 | ТОМ-2 | ТОМ-3
АрхитектураБиологияГеографияДругоеИностранные языки
ИнформатикаИсторияКультураЛитератураМатематика
МедицинаМеханикаОбразованиеОхрана трудаПедагогика
ПолитикаПравоПрограммированиеПсихологияРелигия
СоциологияСпортСтроительствоФизикаФилософия
ФинансыХимияЭкологияЭкономикаЭлектроника

Brake lines and cables

ENGINE MAINTENANCE (MR18DE) | When draining all of engine coolant in the system, open I | AIR CLEANER FILTER | Be sure to clean drain plug (2) and install with new washer. | Never drop or shock it. | REPLACEMENT PROCEDURES | Always use lint free paper towels to wipe fluid off the CVT fluid level gauge. | Do not overfill. |


Читайте также:
  1. BRAKE FLUID LEVEL AND LEAKS
  2. Continuous bread making equipment. Continuous lines.
  3. DISCIPLINES, DISTANCE, STARTS
  4. Ex. 2. Work with a partner For each topic and organization listed, complete the outlines with appropriate supporting points. The first one is done for you.
  5. Exercise 6. In the following text the lines are mixed up. Put them in their proper order. The first and the last lines are in their correct places.
  6. Exercise 7. In the following text the lines are mixed up. Put them in the correct order.

WFIA0513E

D


BRAKE LINES AND CABLES: Checking Brake Line and Cables INFOID:0000000004305214

E

Check brake fluid lines and parking brake cables for improper attachment, leaks, chafing, abrasions, deterioration, etc.

F

 

G

 

H


DISC BRAKE

DISC BRAKE: On Board Inspection

 

PAD WEAR INSPECTION

• Check pad thickness from check hole on cylinder body.

 

Standard thickness: Refer to BR-40, "Front

Disc Brake".

Repair limit thickness: Refer to BR-40, "Front

Disc Brake".


 

SBR389C

 

I

INFOID:0000000004683841

 

 

J

 

K

 

MA


 

 


 

 

DRUM BRAKE


M

BRA0010D

 

 

N


DRUM BRAKE: Inspection INFOID:0000000004683843

 

INSPECTION O

Lining Thickness Inspection

 

P

 


Revision: October 2008


MA-47


2009 Versa


Check lining thickness.

 

Standard thickness (A): Refer to BR-40,

"Rear Drum Brake"

Repair limit thickness (A): Refer to BR-40,

"Rear Drum Brake"

 

 


 

 

Drum Inner Diameter Inspection

Check inner diameter of brake drum. Measurement area: lining contact surface (center)


SBR021A


 

Standard inner diameter: Refer to BR-40, "Rear

Drum Brake"

Repair limit inner diameter: Refer to BR-40, "Rear

Drum Brake"

 


 

 

Wheel Cylinder Leakage Inspection

• Check wheel cylinder for brake fluid leakage.

• Check for wear, damage, and looseness. If any non-standard con- dition is found, replace it.

 

 

Other Inspections

Check the following:

• Inside of the drum for excessive wear, damage, and cracks.

• Lining for excessive wear, damage, and peeling.

• Shoe sliding surface for excessive wear and damage.

• Return spring for sagging.

• Check back plate for damage, cracks, and deformation. Replace back plate as necessary. Replace applicable part as necessary.


Дата добавления: 2015-11-16; просмотров: 58 | Нарушение авторских прав


<== предыдущая страница | следующая страница ==>
BRAKE FLUID LEVEL AND LEAKS| SEAT BELT, BUCKLES, RETRACTORS, ANCHORS AND ADJUSTERS

mybiblioteka.su - 2015-2024 год. (0.006 сек.)