Pitch Bend

• Pitch Bend messages are always transmitted from the PITCH STICK.

• The Pitch bend range (used when receiving pitch bend messages) can be adjusted, see page 73.

Controllers

• The MODULATION WHEEL is transmitted and received via MIDI as Controller 1 (Modulation wheel).

• If you have an Expression pedal connected to the CONTROL PEDAL input, this is transmitted as Controller 11.

• If you have a Sustain pedal connected, this is transmitted as Controller 64 (Damper Pedal).

• All other controls (knobs and switches) on the front panel (except MASTER LEVEL), are also transmitted and received as Control Change messages. This can be used to record your actions on the front panel into a MIDI sequencer, for playback together with the musical performance. For a full list of which parameters correspond to which Controller number, see the MIDI Implementation section on page 103.

You can activate/deactivate transmission/reception of the front panel Controllers, see page 66.

Aftertouch

The Nord Lead 2X can receive (but not send) Aftertouch (channel pressure) messages. You can set which parameter (if any) should be controlled by the Aftertouch messages for each Slot:

1. While holding down the SHIFT button, press the SPECIAL button.

MIDI

Дата добавления: 2015-08-20