Pitch Stick

The PITCH STICK is used to bend the notes, just as with a pitch bend wheel on traditional synthesizers. However, the PITCH STICK differs from other pitch bend devices in a couple of ways:

• There is no dead centre in the middle of the throw. This allows you to use the PITCH STICK for natural vibrato, pretty much like a guitarist do.

• The effect on pitch is logarithmic, that is, the further you move the PITCH STICK away from the center position, the more drastic the effect.

To set the range of the PITCH STICK, proceed as follows:

1. Hold down the SHIFT button and press the button labelled SYSTEM.

Hold down the Shift button...

...and press the button labelled System (the LED above the button lights up).

2. Press the SYSTEM button repeatedly until the character to the left in the DISPLAY says “br” (for Bend Range).

3. Use the UP/DOWN buttons to the left of the DISPLAY, to change the value. The table on page 73 shows you how many semitones each value in the DISPLAY represents.

Modulation Wheel

The effect of moving the MODULATION WHEEL can be different for each Program. You can change the function by pressing the SHIFT button just above the MODULATION WHEEL. You can select between five destinations. A description of each can be found on page 59.

Дата добавления: 2015-08-20