Nord Lead 2X может получать (но не отправлять) сообщения послекасания (давление канала). Вы можете установить, каким параметром (если таковой имеется) должны управлять сообщения послекасания для каждого слота:
1. Удерживая нажатой кнопку SHIFT, нажмите кнопку SPECIAL.
2. Press the SPECIAL button repeatedly, until the left character in the Display reads ‘t’ (for “touch”).
3. Select a Slot for which you want to set the aftertouch function.
4. To assign a parameter for the aftertouch, press STORE. The DISPLAY will flash, showing one of the abbreviations in the table below.
5. Use the UP/DOWN buttons to select one of the following control functions:
| Display shows: | Pedal assigned to: |
| L1 | LFO 1 Amount. |
| L2 | LFO 2 Amount. |
| Fι | Filter Cutoff Frequency. |
| Fп | FM Amount. |
| о2 | Oscillator 2 Pitch. |
6. After you have made your choice, press STORE again. You return to the ‘t’ display.
7. Use the UP/DOWN buttons to select a control amount value (‘oF’ or ‘1’ to ‘7’). This value (shown to the right in the DISPLAY) determines how much the assigned parameter should be affected by a received maximum aftertouch value. If you don’t want the Slot to be affected by aftertouch messages, select the amount value ‘oF’.
8. If needed, repeat steps 3 to 7 to set aftertouch assignment for the other Slots.
9. Press SHIFT to exit the Special menu and return to “play mode”.
Дата добавления: 2015-08-20; просмотров: 103 | Нарушение авторских прав
| <== предыдущая страница | | | следующая страница ==> |
| Pitch Bend | | | Program Change |