Студопедия
Случайная страница | ТОМ-1 | ТОМ-2 | ТОМ-3
АрхитектураБиологияГеографияДругоеИностранные языки
ИнформатикаИсторияКультураЛитератураМатематика
МедицинаМеханикаОбразованиеОхрана трудаПедагогика
ПолитикаПравоПрограммированиеПсихологияРелигия
СоциологияСпортСтроительствоФизикаФилософия
ФинансыХимияЭкологияЭкономикаЭлектроника

Examining Simulation Results

The Aspen Plus Main Window | Using Help | Entering Data on a Sheet | To Use the Next Function to Display the Next Required Sheet | Running the Simulation | Overhead Vapor | Creating a New Simulation | Operation Block | Specifying Data to be Reported | Parameter Value Units |


Читайте также:
  1. Creating a New Simulation
  2. Examining Simulation Results
  3. Expected Results.
  4. Intentional treating idioms as if they were word combinations (or single words) used in their primary sense results in the formation of
  5. Opening an Existing Simulation
  6. Results

When the simulation completes, the Results Available message

appears in the status bar at the bottom of the main window. Now

you can examine the results of your simulation.

1 Navigate to the process flowsheet in one of these ways:

• Click the Process Flowsheet tab, or

• Select Window | Process Flowsheet Window from the

Aspen Plus menu bar.

Note: The menu item | sub-menu item shorthand means “click

on menu item then select sub-menu item. ” This shorthand will be

used for many hierarchical selection processes.

2 In the process flowsheet, select either the block name B1 or the

block itself, then right-click to display the shortcut menu.

Note: Your flowsheet may now have some pressure and

temperature data displayed. You can turn this feature on and off by

selecting View | Global Data. You may also wish to alter the

appearance of your flowsheet by selecting, for example, View |

Zoom | Zoom Full.

3 From the shortcut menu, select Results.

The Block B1 Results Summary sheet appears:

For this run, block results are reported on three forms: Results

Summary, Profiles, and Stream Results. In the Data Browser

menu tree, a checkmark in a square appears next to each form to

indicate that they contain results.

To Display the


Дата добавления: 2015-08-20; просмотров: 52 | Нарушение авторских прав


<== предыдущая страница | следующая страница ==>
Parameter Value Units| Creating Reports

mybiblioteka.su - 2015-2024 год. (0.006 сек.)