Читайте также:
|
|
Temperature 220 F
Pressure 20 psi
Toluene flow rate 200 lbmol/hr
MCH flow rate 200 lbmol/hr
Because the default parameters and units are correct for this
simulation, you only need to enter the values.
The Streams | 1 | Input | Specifications sheet is complete:
2 Click.
The Streams | 2 | Input | Specifications sheet appears. Make
Stream 2 the phenol feed stream.
Getting Started Building and Running a Process Simulation Model 3-15
3 Enter the following specifications for Stream 2:
Parameter Value Units
Temperature 220 F
Pressure 20 psi
Phenol flow rate 1200 lbmol/hr
4 Click.
The Blocks | B1 | Setup | Configuration sheet appears:
Entering Unit Operation Block Data
On the Blocks | B1 | Setup | Configuration sheet, the number of
stages, the condenser type, and two operating specifications are
required data. The reboiler type, valid phases, and convergence
method have default choices displayed in shaded type.
1 Click each box and read the descriptive prompts.
3-16 Building and Running a Process Simulation Model Getting Started
If you click while the sheet is incomplete, the Completion
Status message box appears indicating the missing specifications:
Click to close the Completion Status dialog box.
2 Enter the following specifications for the column:
Дата добавления: 2015-08-20; просмотров: 62 | Нарушение авторских прав
<== предыдущая страница | | | следующая страница ==> |
Specifying Data to be Reported | | | Parameter Value Units |