Morphing

Morphing is a term used to describe a continuous “transfer” between two images, sounds or similar. As described above, the Velocity/Morph function in Nord Lead 2X is normally controlled by velocity. But you can route the function to the MOD WHEEL instead which allows you to continuously fade between two sounds — morphing!

The only thing you have to do to activate morphing for a sound that’s already set up for velocity control is to press the Mod Wheel destination button until Morph is the only lit indicator:

Push this button...

...until only the MORPH LED is lit.

However, if you are setting up a Morph sound from scratch, we recommend the following procedure:

1. Press the MOD WHEEL DESTINATION (SHIFT) button until only the MORPH LED is lit.

2. Make sure the MOD WHEEL is all the way down.

3. Set up the Program (sound) as you want it.

4. Move the MOD WHEEL all the way up.

5. Press the VELOCITY/MORPH ASSIGN button and adjust the knobs so that the Program sounds the way you want it at “the other end” of the Morph.

6. Press the VELOCITY/MORPH ASSIGN button again.

7. Play and move the MOD WHEEL to try out the effect.

You can also use an Expression pedal for Morphing, see page 19.

Please note that the Velocity function in the Filter section can be used even if Morphing is active, so that a Program can be basically Velocity sensitive even though Morphing is activated.

Дата добавления: 2015-08-20