Main Row 1

1 - Program: 1…128 — Select Program in the currently selected bank. If you hold the SHIFT button while changing the Program, the sound will not change until you release the SHIFT button. If you hold the SHIFT button while changing the Program and the sequencer is running, when the SHIFT button is released the sequence will complete (according to the length of Sequence 1) before synchronously changing to the new program and it’s sequence.

2 - Bank Select: 1…4 — Select Bank. Each bank has 128 Programs, for a total of 512 Programs. If you hold the SHIFT button while changing the Bank, the sound will not change until you release the SHIFT button. If you hold the SHIFT button while changing the Bank and the sequencer is running, when the SHIFT button is released the sequence will complete (according to the length of Sequence 1) before synchronously changing to the new program and it’s sequence.

3 - Volume: 0…100 — Master Volume control

4 - Transpose: -36…+36 — Master Transpose control, 0 is centered. Steps in semitones.

5 - BPM: 30…250 — Basic speed for the sequencer in BPM. Actual speed also depends on the Clock Divide setting (see below). If using MIDI clock, it will display the BPM of the incoming MIDI clocks.

6 - Clock Div: see table — Used as a clock divider to provide a wider range of sequencer speeds. When set to 4n (quarter notes), the BPM setting is exact, i.e. 120 BPM = 120 BPM. If set to 2n (half note), the actual speed is half, so a setting of 120 BPM will actually play at 60 BPM.

Swing settings add a delay to every the odd steps (1, 3, 5, etc.), while shortening the even steps by the same amount, for a swing feel to the timing. Half swing is the same with less delay.

Дата добавления: 2015-08-20