About Local Control and Control Change Transmission

The Local Control setting also affects the front panel.

• In Local Off mode the front panel controls can not be used to change the sound directly, they must be routed via MIDI, just as the keyboard.

• However, if you use the Prog/Ctrl function to turn off reception and transmission of Control Change messages altogether, the front panel controls can again be used to change the sound directly, since otherwise there would be no way to use the front panel controls at all.

Prog/Ctrl

This is used for setting how Program Change and MIDI Control Change messages should be handled, and for turning the Arpeggio MIDI Out feature on and off.

These parameters are Global for the entire instrument, that is, the settings are valid for all Programs and Performances.

To switch between the three different parameters, hold down SHIFT and press the PROG/CTRL button. The left character in the DISPLAY switches between ‘P’ (Program), ‘C’ (Control) and ‘A’ (Arpeggio).

For the two first parameters (‘P’ and ‘C’) you use the UP/DOWN buttons to switch between ‘oF’ and ‘on’. The ‘oF’ value means that no data of that type is transmitted or received; ‘on’ means that type of data is both transmitted and received. The Arpeggio MIDI Out feature requires some explanation:

Дата добавления: 2015-08-20