Студопедия
Случайная страница | ТОМ-1 | ТОМ-2 | ТОМ-3
АрхитектураБиологияГеографияДругоеИностранные языки
ИнформатикаИсторияКультураЛитератураМатематика
МедицинаМеханикаОбразованиеОхрана трудаПедагогика
ПолитикаПравоПрограммированиеПсихологияРелигия
СоциологияСпортСтроительствоФизикаФилософия
ФинансыХимияЭкологияЭкономикаЭлектроника

LP 24 dB

Приведенный ниже текст не относится к наборам ударных в перформансах. | What a Performance Contains | Waveform Selector | Sawtooth | Oscillator 2 | Шум, цвет шума и синхронизация волны | KBD Track | Ring Mod | Кольцевая модуляция | Смешивание |


This is the classic synth filter used in the Minimoog and Prophet-5, among others. It cuts out high frequencies rather drastically (24db = 4 poles).

 

HP 24 dB

HP stands for high-pass. This filter is the opposite of the lowpass filter, that is it lets the high frequencies pass and cuts out low frequencies. The filter has a rather steep curve.

 

Тип фильтра

 

LP 12 dB

LP обозначает низкие частоты. Фильтр низких частот оставляет низкие частоты и вырезает высокие. Какие именно частоты будут вырезаны, определяется установкой частоты фильтра (и различными другими элементами управления, как описано ниже).

В низкочастотном режиме 12dB, фильтр имеет нежный спад кривой (12dB = 2 полюса). Этот режим оставляет больше гармоник, чем 24dB, описанный ниже. Этот тип фильтра был использован в различных синтезаторах Oberheim и других.

 

LP 24 dB

Это классический фильтр, использованный в Minimoog и Prophet-5. Он вырезает высокие частоты весьма резко (24db = 4 полюса).

 

HP 24 dB

HP означает высокие частоты. Этот фильтр является противоположностью фильтра низких частот, то есть он оставляет высокие частоты и вырезает низкие. Фильтр имеет достаточно крутой изгиб.

 

BP

To select this type of filter, press the Filter Type button until both the HP and LP 24 buttons light up. BP stands for band pass. In this mode the filter let’s frequencies in the “mid-range” band pass through, while lower and higher frequencies are cut out. Each “slope” in this filter has a 12dB (2-pole) roll-off.

 

Notch + LP

To select this type of filter, press the Filter Type button until both the LP 12 and LP 24 buttons light up. A notch (or band reject) filter can be seen as the opposite of a band pass filter. It cuts off frequencies in a “mid-range” band, letting the frequencies below and above through. However, a plain notch filter is not very musically useful, since it often lets too many frequencies through, resulting in a very sharp, harsh sound. Therefore, the notch filter in Nord Lead 2X is combined with a 12dB Lowpass filter, resulting in a filter curve that looks like this:

 

The audible result of this filter combination is a sound with plenty of body, some of the upper mid-range “bite” removed but a certain amount of high frequencies still present. This type of sound could be very useful for soft, yet clear pads, etc. The special characteristics of the Notch+LP filter will be most obvious with low Resonance settings.

 


Дата добавления: 2015-08-20; просмотров: 74 | Нарушение авторских прав


<== предыдущая страница | следующая страница ==>
Свойства огибающей ADSR| Frequency

mybiblioteka.su - 2015-2024 год. (0.008 сек.)