Function Introduction

A. Display Introduction

1) Data areaЈє It shows speed, water temperature, voltage, mileage.

2) Engine rotation speed ЈєIt shows the engine rotation speed by increasing or decreasing the scale.

Engine rotation speed unit icon

4) Gear shift indication icon: When the engine rotation speed is higher than the preset value the icon will light.

5) Battery voltage warning icon: When the battery voltage is lower than the preset value the icon will light.

6) Engine failure warning icon: When a failure occurring in the engine this icon will light.

7) System time icon: It lights when the system time is shown.

8) Data area: It shows fuel consumption, system time, running time, engine rotate speed.

Failure code prefix

Engine rotate speed unit

11) Instant//Current fuel consumption unit: When the vehicle is moving, it shows instant fuel consumption per 100km. When the vehicle stops, it shows the idle fuel consumption.

12) Tired driving notification icon: When the continuous driving time is longer than the preset value, this icon will flash.

13) System setup icon: It lights when system setup is in process.

14) Water temperature warning icon: It flashes when the temperature of the water is higher than the preset value.

15) Over speed warning icon: It flashes when the speed is higher the preset value.

16) Unit icon: V-battery voltage, Ўж-Celsius, ℉-Fahrenheit, KM-Kilometer, M-Mile, KM/H-kilometer per hour, MPH-Mile per hour

B. HUD Power On Interface

When turned on, the HUD has two modes as follows:

1) Working Mode: In this mode the HUD is reading data from the vehicle OBD and projects them on the windshield.

2) Setup Mode: In this mode the driver can preset info including vehicle displacement, system time, values to give warnings, etc.

C. HUD Display at Working Status

l Instant and Idle Fuel Consumption

		l Current Time
		l Engine Rotation Speed
		l Running Time Duration
			l Current Speed

l Current Journey Mileage

Дата добавления: 2015-10-29