Студопедия
Случайная страница | ТОМ-1 | ТОМ-2 | ТОМ-3
АрхитектураБиологияГеографияДругоеИностранные языки
ИнформатикаИсторияКультураЛитератураМатематика
МедицинаМеханикаОбразованиеОхрана трудаПедагогика
ПолитикаПравоПрограммированиеПсихологияРелигия
СоциологияСпортСтроительствоФизикаФилософия
ФинансыХимияЭкологияЭкономикаЭлектроника

PTZ Control

Warnings and Notices about the power | Contents | User Setting | Video surveillance mode | User log-in | Playback | E-MAP (Electric map) |


Читайте также:
  1. Control Center II
  2. CONTROL SYSTEMS
  3. E) The control function
  4. ENGINE CONTROL ROOM
  5. GRAPHICAL SYMBOLS FOR FIRE CONTROL PLANS
  6. PORT STATE CONTROL MANUAL

 

- PTZ control function is available only for the camera with PTZ facility that PTZ protocol

inside.

- Remote PTZ control is available in both of the local system & network client program

Remote surveillance program).

 

 

 
 


4.1. PTZ control use

- To use PTZ control function, click PTZ button of the DVR main screen.

- Only the user who is allowed to control PTZ in the “Environment set up” can operate this

function.

- If the user can not control PTZ, change the user setting in the “Environment set up”.

[Please refer to the “User setting” part of this manual.]

 

4.2. PTZ Main screen

 

 

             
 
 
 
Preset setting save  
 
Screen keyboard open  
   
 

 


4.3. PTZ Environment set up

- To operate PTZ control function, PTZ camera is required.

- Press the “Option” button and check the PTZ use check box

- Select the PTZ driver DLL.

- After all basic setting, save & close.

 
 

 


4.4. Basic setting

- Check “Use PTZ”: If this box is not checked, the user can not set PTZ control function.

- PTZ Driver select: Choose PTZ Driver DLL of the selected camera.

- PTZ Address input: Input the basic address for PTZ control. (It should be same as the

address set in the PTZ camera.)

- Communication type setting [COMM TYPE]: Select a PTZ control communication type.

COM port type or RS-422 is selectable.

- Baud rate setting [BAUDRATE]: The user can select the BAUD RATE size which shows

data communication speed between DVR & PTZ Camera.

- AUX name setting: If any AUX facility is connected, the user can input the name here.

- Press the Save & Close button after all setting is completed by each camera.

 

 

4.5. Adding Pan/Tilt driver

- The user can add a PanTilt Driver DLL to the DVR, not only the basically installed one in

the PTZ but also new supplemented Driver DLL.

- Click “ADD Driver” button after driver directory setting, to install the selected Drive DLL

to the DVR.

 

[Driver directory setting] [Add after select Driver DLL]

 

 


4.6. PTZ main functions

This system has several PTZ control functions such as basic PanTilt control (up, down, left,

right, diagonal movement),

ZOOM, FOCUS, AUX1~4 output control, and preset function. (Proper PanTilt Driver must

be installed in the camera.)

 

4.6.1. Basic PanTilt control mode

- Up, down, left, right, diagonal movement

- ZOOM, FOCUS

 

 

4.6.2. AUX output control

- 4 AUX output control ports.

- Pantilt Driver & facility that support AUX output are required.

- The order type is ON / OFF control.

       
   
 

 


OFF mode On mode

 

 

4.6.3. Camera Light control

- PanTilt Driver & facility that support Camera light control output are required.

- The order type is ON / OFF control.

       
   

 

 


OFF mode On mode

 

 

4.6.4. Camera IRIS control

- PanTilt Driver & facility that support Camera Iris control output are required.

- The order type is ON / OFF control.

       
 
   
 

 

 


OFF mode On mode

 

 

4.6.5. Camera Auto panning

- PanTilt Driver & facility that support Camera auto panning control output are required.

- The order type is ON / OFF control.

       
   

 

 


OFF mode On mode

- Auto panning function moves the camera position side to side regularly per the time

set.

 

 

4.6.6. Camera Preset operation

- PanTilt Driver & facility that support Camera preset control output are required.

- The order type is ON / OFF control.

 
 

 


[Preset check]

 

- Preset function is for indexing & reserving a specific position of the selected camera

(The designated camera position toward a specific direction).

- The user can select a PTZ camera to use preset function in the live image display

area or among the camera selection buttons.

- Maximum 5 preset reserving & checking is available by each camera.

- Preset buttons of the above image are the index buttons of the reserved positions.

- The camera will move to the reserved position when the user selects the button.

- If the pantilt camera does not support preset function, the buttons are remained

inactivated, and if it does, the buttons are activated automatically.

 

 

4.6.7. Preset reservation setting

- Click the [Setup] button to set preset reservations.

(When the Preset reservation box is open, the [Setup] button will be changed to

[Close].)

- Preset reservation box will be open as the image below.

 

[Preset reservation setting procedure]

 

1. Position the camera by using PTZ direction control key.

2. Decide the reservation no. and set the preset interval.

[0 ~ 59 seconds, 0: the reserved position will be ignored]

3. Input the reserved position name.

4. Click the preset reservation no.

5. The indexed preset will be reserved.

6. Click the [SAVE] button to save the setting.

Preset reservation
7. Click the [close] button to close the Preset reservation box.

 

 

4.6.8 On Screen PTZ

- The user can control PTZ on the display screen directly by using a mouse, without

pressing the PTZ control button.

- To control the PTZ, open the PTZ main screen first and press the left button of the

mouse on the displayed screen that a PTZ camera is set.

P/T operates to the selected direction among the directions indicated on the border

part of the displayed screen.

- The user also can operate zoom-in & out function by using the scroll button of the

mouse.

 

 

4.6.9. Notices

- If no pantilt driver is selected in “Environment Set up”, there will be no operation

when the user operates the basic pantilt control mode. Proper Pantilt Driver must be

selected.

- System beep sounds 1 time if the system works successfully after the user operates

pantilt control with proper basic driver set.

- There will be no beep sound if the user controls the camera which is not set as “Use

PTZ”.

 

5

Chapter

 


Дата добавления: 2015-08-27; просмотров: 62 | Нарушение авторских прав


<== предыдущая страница | следующая страница ==>
Environment Set up| Motion detection area setting

mybiblioteka.su - 2015-2024 год. (0.014 сек.)