Студопедия
Случайная страница | ТОМ-1 | ТОМ-2 | ТОМ-3
АрхитектураБиологияГеографияДругоеИностранные языки
ИнформатикаИсторияКультураЛитератураМатематика
МедицинаМеханикаОбразованиеОхрана трудаПедагогика
ПолитикаПравоПрограммированиеПсихологияРелигия
СоциологияСпортСтроительствоФизикаФилософия
ФинансыХимияЭкологияЭкономикаЭлектроника

Scheme of chemical properties of manganese

History Of Discovery | Occurrence | Make up the equations o f the reactions | Chemical properties of manganese |


Читайте также:
  1. A. Chemical composition of natural gas
  2. B. Chemical analysis and production of gasoline
  3. Chemical properties of iron
  4. Chemical properties of manganese
  5. Chemical properties of nickel
  6. Chemical properties of titanium
  7. Chemical Properties.

 

Low oxidation states

Manganese forms a decacarbonyl Mn2(CO)10 in which each manganese has the required share in 18 electrons to achieve the noble gas configuration. Reduction of this covalent compound with sodium amalgam gives the salt Na[Mn(CO)5], sodium pentacarbonylmanganate (-1); in the ion Mn(CO)5 the noble gas structure is again attained.

Oxidation state + 2

This is the most common and stable state of manganese; the five d electrons half fill the five d-orbitals, and hence any transition of d electrons is not favourable in energy. The colour is correspondingly pale (usually pink).

In oxidation state +2, manganese shows fewer 'transition-like' characteristics than any other transition metal ion (d5 configuration); thus the aquo-ion [Mn(H2O)6]2+ forms a “normal” carbonate MnCO3 which is insoluble in water and occurs naturally as “manganese spar”. The aquo-ion forms typical hydrated salts, for example MnSO4∙7H2O, MnCl2x H2O and double salts, for example (NH4)2Mn(SO4)2∙6H2O.

Dehydration of the simple hydrated salts, by heating, produces the anhydrous salt without decomposition. Addition of alkali precipitates the white basic manganese(II) hydroxide Mn(OH)2.

Addition of ammonia to an aqueous solution of a manganese(II) salt precipitates Mn(OH)2; reaction of ammonia with anhydrous manganese(II) salts can yield the ion [Mn(NH3)6]2+.

MnO. Preparation: Decomposition of manganese salts(MnCO3, Mn(NO3)2) and MnO2 in hydrogen atmosphere:

MnO2 + H2 = MnO + H2O

Reducing properties Mn(ІІ)

 

All Mn(ІІ) compounds display reducing properties

 

When annealing MnO forms to Mn3O4 (Mn+2Mn+32O4) at the presence of air:

6MnO + O2 = 2Mn3O4.

Mn(OH)2 is oxidised by air at standard conditions and becomes dark:

2Mn(OH)2 + O2 + 2H2O = 2Mn(OH)4 ®MnO(OH)2 + H2O

Mn(OH)4 has a various composition (MnO2)x(H2O)y. The oxidation process has the following steps:

4Mn(OH)2 + O2 + 2H2O = 4Mn(OH)3

4Mn(OH)3 + O2 + 2H2O = 4Mn(OH)4

Mn(OH)2 react with halogens (Cl2, Br2) in alkaline medium:

Mn(OH)2 + Br2 + 2NaOH = MnO2 + 2NaBr + 2H2O.

It also transforms to Mn(VI) in concentrated alkali solution (to, a plenty of oxidant):

3MnSO4 + 2KClO3 + 12KOH = 3K2MnO4 + 2KCl + 3K2SO4 + 6H2O

Mn(ІІ) compounds are stable in neutral and acid mediums to the action of Cl2, Br2 and O2. The stronger oxidants can oxidise Mn(ІІ), for instance, ozone:

MnSO4 + O3 + 3H2O = Mn(OH)4 + H2SO4 + O2.

It is a qualitative reaction on the presence of ozone in gas mixtures.

Mn(II) can be oxidised to Mn(VII) in acid medium when it reacts with very strong oxidants:

2MnSO4 + 5PbO2 + 6HNO3 = 2HMnO4 + 2PbSO4 + 3Pb(NO3)2 + 2H2O;

2MnSO4 + 5(NH4)2S2O8 + 8H2O = 2HMnO4 + 5(NH4)2SO4 + 7H2SO4.

dation state + 3

 

Сompounds Mn(ІІІ) and Re(ІІІ) are of low stability, especially in aqueous solutions. Mn (III) is reduced easily to Mn(II) or disproportionate forming Mn(II) and Mn(IV). Re (ІІІ), vice versa, is a reductant that forms highest oxidation states.

Оxide Mn(ІІІ) is produced by heating of MnO2:

4MnO2 = 2Mn2O3 + O2.

Mn2O3 is a basic oxide:

Mn2O3 + 3H2SO4 = Mn2(SO4)3 + 3H2O

Mn(OH)3 can be prepared by the reaction:

Mn2(SO4)3 + 6KOH = 2Mn(OH)3 + 3K2SO4

Hydrated Mn(ІІІ) oxide (or to simplify - Mn(OH)3) is an intermediate product of Mn(OH)2 oxidation by oxygen. Mn(OH)3 displays reducing properties in alkaline medium:

2Mn(OH)3 + Br2+ 2KOH = 2MnO2 + 2KBr + 4H2O

 

Oxidation state + 3

This state is unstable with respect to disproportionation in aqueous solution:

2Mn3+(aq) + 2H2O -> Mn2+ (aq) + MnO2 + 4H+.

However the Mn3+(aq) ion can be stabilised by using acid solutions or by complex formation; it can be prepared by electrolytic oxidation of manganese(II) solutions. The alum CaMn(SO4)2.12H2O contains the hydrated Mn3+ ion, which is strongly acidic. The complexes of manganese(III) include [Mn(CN)6]3- (formed when manganese(II) salts are oxidised in presence of cyanide ions), and [MnF5(H2O)]2-, formed when a manganese(II) salt is oxidised by a manganate(VII) in presence of hydrofluoric acid:

4Mn2+ + 8H+ + MnO4 = 5Mn3+ + 4H2O

Mn3+ + H2O + 5F- = [MnF5(H2O)]2-

Oxidation of manganese(II) hydroxide by air gives the brown hydrated oxide Mn2O3aq, and this on drying gives MnO(OH) which occurs in nature as manganite. (The oxide Mn2O3 also occurs naturally as braunite.) Heating of the oxide Mn2O3 gives the mixed oxide Mn3O4 [manganese(II) dimanganese(III) oxide].

In general, manganese(III) compounds are coloured, and the complexes are octahedral in shape; with four d electrons, the colour is attributable in part to d-d transitions.

Mn2O3 is a solid black substance that dissolves slightly in acids and water. Preparation: Decomposition of manganese MnO2:

4MnO2 = 2Mn2O3 + O2

compounds(IV)

The oxidation state +4 is the relatively stable state of Mn, Tc and Re. Compounds of Mn(IV) are not diverse due to stability and low solubility of MnO2 . Namely MnO2 is the most typical product of oxidation of Mn(II) and reduction Mn(VII), Mn(VI) in neutral medium. The other compounds Mn(IV) are not stable and can be easily transformed to MnO2.

MnO2 is abundant in nature. Manganese(IV) oxide is a dark-brown solid, insoluble in water and dilute acids. Its catalytic decomposition of potassium chlorate(V) and hydrogen peroxide has already been mentioned. It is known that manganese dioxide form family of tunnelled polymorphs capable of intergrowth of their tunnels. Manganese dioxide exists in five polymorphic modifications: a-, b-, g-, e-, d-, and l-MnO2 (see below).

Pure MnO2 is obtained by strong heating of manganese(II) nitrate:

Mn(NO3)2 = MnO2 + 2NO2,

MnO2 is an amphoteric oxide although its acid and basic properties are expressed weakly. It forms low stable sulfate with concentrated H2SO4:

MnO2 + 2H2SO4 = Mn(SO4)2 + 2H2O

And unstable salts Mn(IV) manganites with alkalis:

MnO2 + 2KOH = K2MnO3 + H2O metamanganite

MnO2 + 4KOH = K4MnO4 + 2H2O orthomanganite

 

Hausmanite Mn3O4 can be represented as Mn(II) orthomanganite:

2Mn(OH)2 + H4MnO4 = Mn2MnO4 + 4H2O

Redox properties of Mn(IV) compounds are typical. MnO2 is a strong oxidant (Eo =1.23 V). The reaction with HCl illustrates this behaviour:

MnO2 + 4HCl = MnCl2 + Cl2 + 2H2O;

Although it dissolves in ice-cold concentrated hydrochloric acid forming the complex octahedral hexachloromanganate(IV) ion:

MnO2 + 6HCl = [MnIVCl6]2- + 2H+ + 2H2O

2MnO2 + 2H2SO4 = 2MnSO4 + O2 + 2H2O.

When melting with alkalis at the presence of oxidants it displays reducing agent properties:

2MnO2 + 4KOH + O2 = 2K2MnO4 + 2H2O

MnO2 + 2KOH + KNO3 K2MnO4 + KNO2 + H2O

2MnO2 + 3PbO2 + 6HNO3 = 2HMnO4 + 3Pb(NO3)2 + 2H2O

TcO2 (black) and ReO2 (brown) oxides are known. ReO2 can be obtained indirectly:

Re2O7 + 3H2 = 2ReO2 + 3H2O

2NH4ReO4 = 2ReO2 + N2 + 4H2O.

or when heated a mixture of Re2O7 and Re, disproportionation reaction:

2Re2O7 + 3Re = 7ReO2

3ReO3 = ReO2 + Re2O7

Technetium(IV) oxide has similar preparation procedures. ReO2 is unstable and disproportionate easily:

7ReO3 = 3Re + 2Re2O7

Acid properties are decreased in the series Mn-Tc-Re. Re(OH)4 displays very weak basic properties:

ReO2 + 2NaOH = Na2ReO3 + H2O renite

ReO2 has reducing properties:

4ReO2 +3O2 = 2Re2O7

 

Oxidation state + 4. Analysis and complexes

 

An oxidation which can be used to estimate the amount of manganese(IV) oxide in a sample of pyrolusite is that of ethanedioicor oxalic acid, H2C2O4:

MnO2 + (COOH)2 + H2SO4 = MnSO4 + 2CO2 + 2H2O

Excess standard acid is added, and the excess (after disappearance of the solid oxide) is estimated by titration with standard potassium manganate(VII). Alternatively, a known weight of the pyrolusite may be heated with concentrated hydrochloric acid and the chlorine evolved passed into potassium iodide solution. The iodine liberated is titrated with sodium thiosulfate:

MnO2 = Cl2= I2 = 2S2O32-

Although the complex ion [MnCl6]2- is unstable, salts such as K2[MnF6] (containing the octahedral hexafluoromanganate(IV) ion) are much more stable and can be crystallised from solution.

Oxidation state + 5

This state exists as a manganate (V), the blue MnO43-, Na3MnO4.10H2O is isomorphous with Na3VO4. When melting MnO2 with soda and saltpeter аt the presence of air a typical blue colour of MnO43- ion appears. Mn here has oxidation state +5:

MnO2 + Na2CO3 + NaNO3 = Na3MnO4 + CO2 + NO2

Salts Mn(+5) can easily disproportionate:

2Na3MnO4 + 2H2O = MnO2 + Na2MnO4 + 4NaOH

Oxidation state +6

This is only found in the green manganate(VI) ion. It is only stable in alkaline conditions; in neutral or acid solution itdisproportionates:

3 MnO42- + 2H2O = MnO2 + 2MnO4- + 4OH-

Manganates are stable in the strong alkaline medium. They have tendency to dissociate and form more stable compounds of Mn(IV I,VII):

3K2MnO4 + 2H2O Û 2KMnO4 + MnO2 + 4KOH.

This reaction is reversible, the growth of alkali concentration stabilises MnO42-, and vice versa, in acid medium Mn(VI) is decomposed completely:

3K2MnO4 + 2H2SO4 = 2KMnO4 + MnO2 + 2K2SO4 + 2H2O.

It explains the fact that H2MnO4 has not been prepared yet and its anhydride MnO3 does not exist.

Manganates are reducing agents when react with strong oxidants:

2K2MnO4 + Cl2 = 2KMnO4 + 2KCl.

There are more stable compounds of Tc(VI) and Re(VI). Oxides TcO3 (red), ReO3 (red), fluorides, chlorides, salts (for instance, K2ReO4) are known.

Compounds of Re(VI) disprportionate like Mn(VI).

ReO3 is usually obtained:

ReO2 + Re2O7 = 3ReO3

Oxidation state + 7

Apart from two unstable oxyhalides, MnO3F and MnO3Cl, this state is exclusively represented by the oxide Mn2O7 and the anion MnO4-. Crystalline KMnO4 forms oily deep-green or dark coloured liquid of Mn(VII) oxide with concentrated H2SO4:

2KMnO4 + 2H2SO4 = Mn2O7 + 2KHSO4 + H2O.

This substance is very unstable. It is decomposed (sometimes explosively) on heating to manganese (IV) oxide and oxygen:

2Mn2O7 = 4MnO2 + 3O2.

Mn2O7 is a powerful oxidant. Reactons with organic substances (alcohols, ethers etc.) are so violent that organic compounds burn. Manganese heptoxide is an acid oxide. It forms with water permanganic acid.

Mn2O7 + H2O = 2HMnO4.

Dihydrate HMnO4.2H2O can be isolated as purple solids by low temperature evaporation of the frozen solution. Permanganic acid is one of the most strong acids that dissociates into ions almost completely and has pink colour. This acid is stable in aqueous solutions (less than 20% by mass). It is actively decomposed in more concentrated solutions:

4HMnO4 = 4MnO2 + 3O2 + 2H2O.

Permanganic acid is also a violent oxidising agent, especially when it reacts with any organic material; it decomposes quickly at 276 K. The purple permanganate anion, MnO4- is tetrahedral; it owes its intense colour to charge transfer (since Mn+7 has no d-electrons). The potassium salt KMnO4 is the most frequently used reagent but other cations form soluble permanganates too (all these salts are purple). Salts of large size cations (for example Cs+) are less soluble. Potassium permanganate can be prepared by electrolytic oxidation of manganese metal (oxidation from 0 to +7) using a manganese anode in potassium carbonate solution;

oxidation of manganate(II) (oxidation +2 to +7), using the peroxodisulfate ion S2O82-and a manganese(II) salt

Potassium manganate(VII) disproportionates on heating:

2KMnO4 = K2MnO4 + MnO2 + O2

The manganate(VII) ion slowly oxidises water:

4 MnO4- + 4H+ = 4MnO2 + 2H2O + 3O2

This reaction proceeds very slowly in absence of light, and aqueous solutions of potassium manganate(VII) are effectively stable for long periods if kept in dark bottles.

The manganate(VII) ion is one of the more useful oxidising agents; in acid solution we have

MnO4-(aq) + 8H3O+ + 5e- = Mn2+(aq) + 12H2O; Eo = + 1.52 V

 

Hence acid solutions of manganate(VII) are used in chemical analysis or to oxidise, for example, quantitatively. The equivalence point of redox titration is recognised by persistence of the purple colour. (Sulfuric acid is used to acidify, since hydrochloric acid is oxidised to chlorine, and nitric acid is an oxidising agent.)

Manganates(VII) are also applied extensively in organic chemistry, for example, to oxidise alcohols to aldehydes in acid or (more commonly) in neutral medium where manganese(IV) oxide is the product.

In concentrated alkali, manganese(VI) is more stable than manganese(VII) and the following reaction occurs:

4MnO4- + 4OH- = 4MnO42-+ 2H2O + O2

It can be seen that redox behaviour of permanganate-ion depends on pH index. The scheme illustrating this dependence is shown below:

 

2KMnO4 + 5K2SO3 + 3H2SO4 = 2MnSO4 + 6K2SO4 + 3H2O

2KMnO4 + 3K2SO3 + H2O = 2MnO2 + 3K2SO4 + 2KOH

2KMnO4 + K2SO3 + 2KOH = 2K2MnO4 + K2SO4 + H2O.

The relation of permanganates to halide-ions (Cl-, Br-, I-) illustrates the decrease of their oxidizing abililty at the growth of pH index. MnO4- ion is able to oxidize all halides in an acid medium including chlorine:

2KMnO4 + 16HCl = 2MnCl2 + 5Cl2 + 2KCl + 8H2O.

It can oxidise only iodine in neutral medium. In contrary, Cl2 and Br2 are able to oxidize lower valenced manganese to +7:

2MnO42- + Br2 = MnO4- + 2Br-.


Дата добавления: 2015-07-25; просмотров: 81 | Нарушение авторских прав


<== предыдущая страница | следующая страница ==>
Chemical Properties.| The stability of compounds in the series Mn(VII) — Tc(VII) — Re(VII) is considerably increased but oxidising properties are decreased.

mybiblioteka.su - 2015-2024 год. (0.021 сек.)