Студопедия
Случайная страница | ТОМ-1 | ТОМ-2 | ТОМ-3
АрхитектураБиологияГеографияДругоеИностранные языки
ИнформатикаИсторияКультураЛитератураМатематика
МедицинаМеханикаОбразованиеОхрана трудаПедагогика
ПолитикаПравоПрограммированиеПсихологияРелигия
СоциологияСпортСтроительствоФизикаФилософия
ФинансыХимияЭкологияЭкономикаЭлектроника

Essential parts of a Diesel engine

Introduction | Part III. Trunk engines and Crosshead engines | Part V. The working of a two-stroke engine | Part VI. The working of a four-stroke engine | Part VII. The valve mechanism |


Читайте также:
  1. C2005/F2401 '06 Answers to Recitation Problems #2 1. Hint: Consider which molecules (or parts thereof) are hydrophobic or hydrophilic.
  2. DIFFERENT PARTS OF PRESENTATION
  3. Engine and Wing Anti-Ice System
  4. ENGINEERING AS A PROFESSION
  5. Essential Business Trip Planning
  6. ESSENTIAL COURSE

The diesel engine is composed of the following parts:

Bedplate (engine frame) and crankcase.

These two parts make a supporting structure to hold the cylinders, crankshaft and main bearings. The crankcase serves as oil sump for the forced lubrication system.

Cylinders are made of cast iron. They are fixed to the frame by means of long through-bolts. The cylinders are provided with large removable inspection doors through which the cooling water spaces may be inspected and cleaned.

Cylinder covers (heads) close the top end of the cylinders.

Cylinder liners.

Piston and piston rings: The piston is made of steel, cast iron or special alloy which is highly resistant to heat stresses.

According to size, the piston is provided with piston rings to produce compression and scraper rings to prevent lubricating oil from penetrating into the combustion chamber.

Connecting rods. The connecting rod is made of steel.

The connecting rod connects the piston to the crank on the crankshaft. It transmits force in either direction from the piston to the crank on the crankshaft

The crankshaft is made of forged steel. It has bored ducts conveying the forced lubrication oil to all bearings.

Valves serve to admit the air and to discharge the exhaust gases.

The camshaft is of steel and is driven from the crankshaft through gear wheels.

The bearings are roller and ball bearings. The cams are of case hardened steel. The camshaft drives the fuel pumps, one for each cylinder.

The flywheel is a heavy wheel fastened to the crankshaft. Its purpose is to keep the engine running smoothly from the time of one power stroke to the next power stroke.

In double acting engines a crosshead and a piston rod are included.


Дата добавления: 2015-07-25; просмотров: 271 | Нарушение авторских прав


<== предыдущая страница | следующая страница ==>
Part VIII. Reversing the engine. Controllable pitch propellers.| СТАНДАРТ ОРГАНИЗАЦИИ

mybiblioteka.su - 2015-2024 год. (0.007 сек.)