Студопедия
Случайная страница | ТОМ-1 | ТОМ-2 | ТОМ-3
АвтомобилиАстрономияБиологияГеографияДом и садДругие языкиДругоеИнформатика
ИсторияКультураЛитератураЛогикаМатематикаМедицинаМеталлургияМеханика
ОбразованиеОхрана трудаПедагогикаПолитикаПравоПсихологияРелигияРиторика
СоциологияСпортСтроительствоТехнологияТуризмФизикаФилософияФинансы
ХимияЧерчениеЭкологияЭкономикаЭлектроника

The resulting COD load, the points in the graph show the linear dependency

Читайте также:
  1. Application of Radiography to Endodontics
  2. Dependency of D on Wood Species
  3. Exercise 7. Read and translate the text. Formulate the topic sentence of each paragraph. Express the main ideas of the text.
  4. Geographical Position of Great Britain
  5. Geographical Position of the United States of America
  6. Geographical Position of Ukraine
  7. Guided summary. Use the sentences from the text below to complete this paragraph. You are free to make any changes.

(Fig. 6.6). This applies not only to the COD but in parallel to total organic carbon

(TOC). Because the amount of dissolved compounds must correlate with the pulp

Yield, bleaching to a very high brightness decreases the yield. Fines are extracted

And freeness is increased. The extraction effect not only affects pulp yield and opacity,

But also has an impact on fiber properties. With intense extraction, hardwood

Fibers collapse, making it difficult to produce highly bleached fiber with a high

Volume (bulk). For most paper-grade applications, fiber volume should be low in

Order to allow a smooth surface. In the production of white board, the opposite is

Valid and stiff fibers with a high volume are an advantage; however, this requires

To carry out bleaching with other alkali sources.

Bleaching of Mechanical Pulp

0,4 0,8 1,2 1,6 2,0 2,4

H

O

H

O

H

O

H

O

COD [kg/t]

NaOH-charge [%]

Fig. 6.6 Increase of the COD load with increasing caustic

Soda addition in bleaching with hydrogen peroxide.

The substitution of caustic soda with magnesium hydroxide is a useful alternative

[36], although because of the limited solubility of Mg(OH)2, effective mixing

Becomes even more important. The particle size is similarly important, as a fine

Product is distributed better. The amount of Mg(OH)2 can be kept low; the limited

Solubility would only result in a high neutralization demand. It is sufficient to add

about 1–1.2% to activate the bleaching process with 2–4% H2O2. The demand for

sodium silicate is even lower, and an input of only 0.5–1% will result in the best

Response. The moderate impact on hemicellulose extract becomes apparent with a

Lower COD load (see Fig. 6.7).

2 3 4 5

COD [kg/t]

Mg(OH)2

NaOH

H2O2 [%]

Fig. 6.7 Impact of an exchange of NaOH by Mg(OH)2 in

Bleaching pressurized groundwood with increasing amounts of

H2O2 and NaOH or Mg(OH)2 as alkalization source [NaOH

amount variable, Mg(OH)2 input 0.75% at 2% H2O2, all other

bleaches 1%, 2% sodium silicate, 70 °C, 3 h, 20% consistency].

Bleaching with Hydrogen Peroxide

When bleaching aspen pulp, the impact on fiber volume of using Mg(OH)2 is

pronounced. Conventional bleaching to very high brightness (>85% ISO) is

accompanied by a decrease in the specific volume from >2 cm3 g–1 to 1.4 cm3 g–1,

or even less. The substitution allows the specific volume (also labeled as “bulk”) to

Be maintained. In a set-up using the Mg(OH)2 stage as the main (high consistency)

Stage and an additional (medium-consistency) stage with caustic soda as a

Brightness adjustment step, it is possible to balance the parameters of bulk and

Tensile strength to all levels in between (Fig. 6.8). The more moderate response in


Дата добавления: 2015-10-21; просмотров: 82 | Нарушение авторских прав


Читайте в этой же книге: A conical refining gap inside one refiner housing (Fig. 4.30). | The control strategy of the paper machine. Varying refiner positions (1st stage, 2nd | Stretched length directionally) | Screens. The shives and stiff long fibers are removed as rejects from below, | Separation according to material density is carried out using hydrocyclones | In a TMP mill, heat recovery plays an essential role in economic operating. Normally, | Oxidative processes. | Initially, the zinc hydroxide is filtered off and reprocessed to zinc dust. Then, | Bleaching with Dithionite 1125 | Acids. However, because hydrogen peroxide will not react easily with the |
<== предыдущая страница | следующая страница ==>
And remaining residual allows the conclusion to be made that the residual must| Bleaching to the activation with Mg(OH)2 is compensated by a final hydrosulfite

mybiblioteka.su - 2015-2024 год. (0.006 сек.)