Студопедия
Случайная страница | ТОМ-1 | ТОМ-2 | ТОМ-3
АвтомобилиАстрономияБиологияГеографияДом и садДругие языкиДругоеИнформатика
ИсторияКультураЛитератураЛогикаМатематикаМедицинаМеталлургияМеханика
ОбразованиеОхрана трудаПедагогикаПолитикаПравоПсихологияРелигияРиторика
СоциологияСпортСтроительствоТехнологияТуризмФизикаФилософияФинансы
ХимияЧерчениеЭкологияЭкономикаЭлектроника

Fiber length below 0.2 mm, indicating the presence of large amounts of fines derived

Читайте также:
  1. Above 10 000 tons of fiber was considered to be a huge operation. Recovery of
  2. Act out the dialogues below in pairs
  3. And density) as well as the fiber strength (dry and rewetted zero-span tensile
  4. Change in viscosity is more pronounced for beech dissolving pulp, indicating that
  5. Chlorine are much smaller, and produce pulp in amounts between 1000 and several
  6. Content, indicating the fragmentation of microfibrils. Clearly, temperatures
  7. Contour length

By both parenchymal cells (primary fines) and degraded pulp fibers (secondary

Fines). In contrast, eucalyptus pulps are characteristic for a narrow fiber length

Distribution and an extremely low coarseness which contributes to a high accessible

Surface area of the pulp fibers.

Paper-Grade Pulp

0 1 2 3 4 5 6

Spruce-KRAFT

Fiber Length [mm]

Spruce-SULFITE

Eucalyptus-KRAFT

Lenght weighted fraction [%]

Beech-SULFITE

Fig. 11.5 Fiber dimensions of a representative selection of

Commercial hardwood and softwood kraft and sulfite pulps

[17]. Fiber dimensions determined using Kajaani FS200.

Tab. 11.3 Fiber dimensions of fully bleached commercial paper

pulps, as determined with Kajaani FS200 [17].

Parameter Pine Spruce Eucalyptus Beech Spruce Spruce Beech

Kraft Kraft Sulfite Sulfite

ECF TCF ECF ECF TCF ECF TCF

Average fiber length

Arithmetic mm 0.90 1.04 0.55 n.d. 0.79 0.52 0.28

Length-weighted mm 2.16 2.36 0.72 n.d. 2.15 1.89 0.66

Weight-weighted mm 2.82 3.01 0.91 n.d. 2.93 2.91 0.86

Fines (P < 0.2 mm) wt% 3.5 2.7 2.0 n.d. 4.2 7.9 12.8

Coarseness mg m–1 0.213 0.215 0.074 n.d. 0.227 0.219 0.122

n.d. = not determined

Pulp Properties and Applications

11.3

Dissolving Grade Pulp

11.3.1

Introduction

Dissolving pulp refers to pulp of high cellulose content which is used to manufacture

Various cellulose-derived products such as regenerated fibers or films (e.g.,

Viscose, Lyocell), cellulose esters (acetates, propionates, butyrates, nitrates) and

Cellulose ethers (carboxymethyl-, ethyl-, methyl-celluloses). The wood-derived celluloses

which account for about 85–88% of the total dissolving pulp market are

Made by the prehydrolysis kraft and acid sulfite processes comprising additional

Purification stages such as hot and cold caustic extraction. The residual amount of

Dissolving pulps is based on cotton linters. The linters fibers, being attached to

The cotton seeds, are removed by the delintering process, producing fibers of different

Lengths. The shortest fibers or second-cut linters are used as chemical feedstock.

Purification is accomplished by a combination of mechanical and chemical

Steps comprising mild alkali treatment at elevated temperature to remove proteins,

Waxes, pectins and other polysaccharides and bleaching to achieve the required

Brightness level. Purified cotton linters represent the dissolving pulp of

Highest cellulose purity particularly used for manufacturing acetate plastics and

High-viscosity cellulose ethers.

When using softwoods and hardwoods as a raw material, more drastic conditions

In pulping and bleaching operations are required in order to obtain a highquality

Dissolving pulp. However, even least amounts of residual impurities such


Дата добавления: 2015-10-21; просмотров: 128 | Нарушение авторских прав


Читайте в этой же книге: Fifteen years of development. Pulp Paper | To applications such as newsprint, toilet tissues, and paperboard as they tend to | Be transferred to paper-grade pulps. The papermaking properties of pulp are | Acid side chains. The glycosidic bond between uronic acid and the xylan backbone | High LODP, the high modulus in the stress-strain curve, the excellent swelling | Of chemical paper pulps, including TCF and ECF variants for both softwood | Be expected when high dosages of, for example, ozone, or other bleaching chemicals | Is rather unstable in acid sulfite pulping, and this results in a low (hemicellulose) | Groups, depending on the amount and their distribution along the polysaccharide | Beech Sulfite Beech Kraft Eucalyptus Kraft |
<== предыдущая страница | следующая страница ==>
From rather high molecular-weight cellulose and very low molecular-weight hemicellulose| As resins or inorganic compounds can adversely affect the filterability of viscose,

mybiblioteka.su - 2015-2024 год. (0.006 сек.)