Студопедия
Случайная страница | ТОМ-1 | ТОМ-2 | ТОМ-3
АвтомобилиАстрономияБиологияГеографияДом и садДругие языкиДругоеИнформатика
ИсторияКультураЛитератураЛогикаМатематикаМедицинаМеталлургияМеханика
ОбразованиеОхрана трудаПедагогикаПолитикаПравоПсихологияРелигияРиторика
СоциологияСпортСтроительствоТехнологияТуризмФизикаФилософияФинансы
ХимияЧерчениеЭкологияЭкономикаЭлектроника

Treatment HW-Sulfite HW-PHK

Читайте также:
  1. Chemistry of Chlorine Dioxide Treatment
  2. Consult the TEXTS FOR SUPPLEMENTARY READING and learn about the advent of municipal water treatment (Text 48). Be ready to discuss the information you have read.
  3. Effect of Pretreatments and Additives
  4. Effect of Sodium Borohydride after Treatment
  5. Efficiency and Selectivity of Ozone Treatment
  6. High-Consistency Ozone Treatment
  7. Large amounts may be generated in the primary and secondary treatment stages.

Unbleached (E/O) O

Untreated 6.0 2.1 2.8

CCE 4.5 1.8 2.3

Cold Caustic Extraction

Clearly, delignification is most pronounced for the unbleached pulp. However,

Significant parts of the residual lignin structures are even removed after oxygen

Delignification through CCE, but this may be attributed to the dissolution of xylan

linked to residues of oxidizable structures (degraded lignin and/or HexA?).

8.3.6

Molecular Weight Distribution

The aim of CCE is selectively to remove short-chain carbohydrates and other alkaline-

Soluble impurities, and this leads to a narrowing of the molar mass distribution.

The effect of CCE on molecular weight distribution (MWD) has been investigated

Using a standard hardwood sulfite dissolving pulp (HW-S). The data in

Fig. 8.14 show that the main part of the short-chain carbohydrates with molecular

Weights ranging from 2.5 to 12 kDa (maximum at 5 kDa) is removed through

CCE. At the same time, the mid-molecular weight region between 30 and 380 kDa

becomes enriched. CCE treatment at low temperature (23 °C) proves to be rather

Selective. Only a very small proportion of the very high molecular-weight fractions

(>1000 kDa) is degraded through CCE. Numerical evaluation of the MWD confirms

The removal of short-chain material (Tab. 8.2). It should be noted that the

Polydispersity and amount of low molecular-weight fractions (below DP50 and

DP 200) are significantly decreased, while the high molecular-weight fraction

Remains largely unchanged (beyond DP2000).

103 104 105 106 107

0.0

0.2

0.4

0.6

0.8

1.0

HW-S CCE treated HW-S Δ (CCE-Untreated)

dW/dlogM

Molar Mass [g/mol]

Fig. 8.14 Molar mass distribution of a hardwood-sulfite dissolving

pulp (HW-S) before and after CCE treatment [12].

CCE-treatment: 80 g L–1 NaOH, 23 °C, 45 min.

Tab. 8.2 Numerical evaluation of molecular weight distribution

of HW-S pulp before and after CCE treatment [12]. DP: degree of

polymerization, I: weight fraction.

Pulp DPw DPn PDI I< P50

[wt.%]

I< P200

[wt.%]

I> P2000

[wt.%]

HW-S 1950 245 8.0 5.1 17.4 27.9

HWS-CCE 1880 355 5.3 2.0 13.4 26.6

8.4

Hot Caustic Extraction

The purpose of hot caustic extraction (HCE) is to remove the short-chain hemicelluloses

(determined as S18, S10 fractions) for the production of reactive dissolving

Pulps based on acid sulfite cooking. In contrast to cold caustic purification, which

Relies on physical effects such as swelling and solubilization to remove short-chain

Noncellulosic carbohydrates, hot alkali extraction utilizes primarily chemical reactions


Дата добавления: 2015-10-21; просмотров: 97 | Нарушение авторских прав


Читайте в этой же книге: Appears to be alkali-resistant), the NaOH concentration must be increased from | This explains the different pattern of hemicelluloses removal as compared | During alkalization of a beech sulfite dissolving | Content is almost negligible. Therefore, the main objective of the alkali | Lattice planes is widened from the original 0.61 nm to more than 1.2 nm due | Washing. The pulp entering the CCE stage must be thoroughly washed and | Fig. 8.5 Purification of hardwood sulfite pulps | Increase equally affects purification, as would a decrease in NaOH concentration | Losses of alkali would be to recirculate the pressed lye to the sodium hydroxide | Fig. 8.10 Effect of the presence of low (gamma) and high |
<== предыдущая страница | следующая страница ==>
Into cellulose II.| On the entire pulp substrate for purification.

mybiblioteka.su - 2015-2024 год. (0.005 сек.)