Студопедия
Случайная страница | ТОМ-1 | ТОМ-2 | ТОМ-3
АвтомобилиАстрономияБиологияГеографияДом и садДругие языкиДругоеИнформатика
ИсторияКультураЛитератураЛогикаМатематикаМедицинаМеталлургияМеханика
ОбразованиеОхрана трудаПедагогикаПолитикаПравоПсихологияРелигияРиторика
СоциологияСпортСтроительствоТехнологияТуризмФизикаФилософияФинансы
ХимияЧерчениеЭкологияЭкономикаЭлектроника

Feed Consistency

Читайте также:
  1. Consistency
  2. Effect of Pulp Consistency
  3. High-Consistency Ozone Treatment
  4. Medium Consistency Mixers
  5. Medium Consistency Pumps
  6. Peroxide bleaching is more complicated, however. High-consistency dewatering

The feed consistency determines the amount of liquor that has to pass the screen

at a given pulp production capacity. Pressure screens can operate at feed consistencies

up to 4% or 5%. The latter figure represents hardwood pulp, which generally

allows higher feed consistencies than softwood pulp. The limiting factor

defining the feed consistency ceiling is reject thickening. A screen’s pulp capacity

increases with rising feed consistency, until a point is reached when it rapidly

decreases due to blinding caused by excessive reject thickening.

A screening system with a high feed consistency is more compact and requires

less electrical energy than a low-consistency system due to the reduced amounts

of liquor pumped around. It is, however, also more demanding to control because

it operates closer to the critical point of reject thickening. At higher consistency,

blinding is favored not only by the increasing population of fibers but also by a

reduced backflush through the screen apertures. It has been shown that the intensity

of the pressure pulse goes down considerably with increasing pulp feed consistency

[13].

The passage ratio decreases as feed consistency goes up [6]. While different

opinions exist about the effects of feed consistency on screening efficiency, it is

likely that the latter is not significantly affected by the feed consistency [15]. However,

a more dilute feed is clearly improving the fractionation efficiency [19].

Several designs of modern washing equipment require feed consistencies between

3% and 4%. If such a piece of equipment is installed downstream of the

screen, only higher-end feed consistencies can provide the needed levels of accept

consistency. If the accept consistency is not critical, a good compromise between

screening efficiency, operability and power consumption for standard screening

applications may be found in the feed consistency range of 2.5% to 3.5%, with softwood

furnish at the lower end and hardwood furnish at the higher end of the range.

Temperature

The operating temperature affects the behavior of both liquor and solids. On the

one hand, the pulp fibers become more flexible at higher temperatures (see also

Section 6.3.3.1), while on the other hand the liquor viscosity decreases with higher

temperatures, improving the turbulence in the screening zone. Both of these

effects cause the screen capacity to rise [12].


Дата добавления: 2015-10-21; просмотров: 91 | Нарушение авторских прав


Читайте в этой же книге: Conventional Drum Washers | Atmospheric Diffuser | Pressure Diffuser | In-Digester Washing | References | Introduction | Introduction | Flow Regime | Fiber Passage and Reject Thickening | Selective Fiber Passage |
<== предыдущая страница | следующая страница ==>
Screen Basket| Rotor Tip Velocity

mybiblioteka.su - 2015-2024 год. (0.006 сек.)