Студопедия
Случайная страница | ТОМ-1 | ТОМ-2 | ТОМ-3
АвтомобилиАстрономияБиологияГеографияДом и садДругие языкиДругоеИнформатика
ИсторияКультураЛитератураЛогикаМатематикаМедицинаМеталлургияМеханика
ОбразованиеОхрана трудаПедагогикаПолитикаПравоПсихологияРелигияРиторика
СоциологияСпортСтроительствоТехнологияТуризмФизикаФилософияФинансы
ХимияЧерчениеЭкологияЭкономикаЭлектроника

Chemistry of Chlorine Dioxide Treatment

Читайте также:
  1. As minor streams are neglected, such as dust, sulfur dioxide, reduced sulfur compounds
  2. Chemistry of (Acid) Sulfite Cooking
  3. Chemistry of hydrogen peroxide bleaching
  4. Chemistry of Oxygen Delignification
  5. Chlorine are much smaller, and produce pulp in amounts between 1000 and several
  6. Chlorine Dioxide Bleaching of Oxygen-Delignified Kraft Pulps

Manfred Schwanninger

The residual lignin from unbleached or semibleached pulps, which could not be

removed by pulping, must be removed from pulp through oxidative lignin degradation

with bleaching reagents such as chlorine dioxide. The structure and reactivity

of the residual lignin have already been described (see Section 4.2.4, Lignin

structures and their reactivity; Composition of lignin, residual lignin after cooking

and bleaching).

Most knowledge regarding the proposed reaction pathways of chlorine dioxide

and lignin, and of compounds formed during bleaching, is derived from model

compound studies [1–8], molecular orbital calculations [9,10] and from bleached

residual lignin of kraft pulps [11–19]. However, whilst much information is available

on the reaction pathways and degradation products formed during chlorine

dioxide bleaching, for reasons of space only a minimal amount can be selected

and presented in this section.

In principle, a distinction can be made between: (a) oxidations by the oxidant

(chlorine dioxide), which affords a great variety of products and illustrates the

complexity of chlorine dioxide bleaching; and (b) the chlorination of aromatic

rings (this will be described later).

The initial steps of bleaching with chlorine dioxide are shown in Scheme 7.23.

Oxidations of aromatic substrates with chlorine dioxide are initiated by electrophilic

addition of the oxidant to the aromatic nuclei. This results in the generation

of charge-transfer (= p) complexes [1]. These complexes become protonated in

acidic media, thereby enhancing the formation of corresponding resonance-stabilized

cation radicals by the elimination of chlorous acid. In the case of phenolic

substrates (R1 = H), these cation radical intermediates readily lose a proton, affording

phenoxyl radicals in various mesomeric forms (Scheme 7.24; 8, 9, 10, and 11).

In the case of nonphenolic substrates (R1 = alkyl or aryl), the intermediary cation

radicals exist in various ortho- and para-oxonium ion forms (Scheme 7.25; 26 and

27) [1].

Creosol (Scheme 7.24), a simple phenolic compound, represents structural

types that were assumed to be present in residual lignin [1]. The methyl group

was thought to indicate side chains lacking a free or etherified hydroxyl group in

the a-position [1], although finding a methyl alpha position in lignin is highly unlikely.

The formation of the oxidations products (Scheme 7.242) begins from the

7.4 Chlorine Dioxide Bleaching 745

O

OCH3

R

+ ClO2

- HClO2

R1

O

OCH3

R

R1

ä +

ä −

CT - complex

ð - complex

+ H+

O

OCH3

R

R1

+

O

OCH3

R

R1

+ OH

OCH3

R

+

O

OCH3

R

R1

+

R1 = H R1 = alkyl or aryl

O

OCH3

R

phenolic structures non-phenolic structures

ClO2

Scheme 7.23 The initial steps of a general course of bleaching

with chlorine dioxide (from Ref. [1]).

phenoxyl radical in its ortho- and para-mesomeric forms (811) by coupling with

chlorine dioxide, yielding the chlorite esters of ortho- and para-quinols which

undergo various reactions. Hydrolysis of the chlorous ester intermediate (14)

accompanied by an oxidative demethoxylation gives the corresponding ortho-quinone

(15), and subsequent reduction leads to 4-methylcatechol (16). Heterolytic

fragmentation of the chlorous ester intermediate (14) leads to cleavage of the aromatic

ring with formation of 3-methylmuconic acid monomethyl ester (18), as

well as the cyclization product 4-carbomethoxymethyl-4-methylbutenolide (19).

The competing reactions, the hydrolysis and the heterolytic fragmentation of the

quinol chlorous ester (14), should provide quantitative correlation between the

products (15, 18 and 19), which is difficult to show since the quinone (15) readily

undergoes dimerization and polymerization in addition to the reduction yielding

16. Hydrolysis of the chlorous ester intermediate (12) gives a compound (13) to

which an oxirane structure is tentatively ascribed. In a competitive reaction, two

radicals of 11 may couple to give bis-creosol (17). Chlorine dioxide addition to the

para-form of the phenoxyl radical (10) followed by elimination of chlorous acid,

746 7Pulp Bleaching

results in the formation of a quinone methide intermediate (21). Nucleophilic

addition of water, chlorous acid or creosol to this intermediate gives rise to vanillyl

alcohol (23), vanillin (25) and the diarylmethane (22), respectively.

The formation of quinoid structures (e.g., 15) represents the main oxidative

change of creosol-type phenols subjected to chlorine dioxide. Under the conditions

usually employed, such structures are not stable and undergo reduction to

catechols, and possibly also further oxidation with chlorous acid [1]. These experimental

results are in good agreement with the thermodynamic results determined

by computational methods [9].

O

OCH3

CH3

O

H3CO

CH3

O

OCH3

CH3

O

OCH3

CH3

H

+ ClO2

O

H3CO

CH3

H

OClO

+ H2O - HClO2

OH

H3CO

CH3

O

O

OCH3

CH3

+ ClO2

- HClO2

- CH3OH

+ H2O

OClO

O

CH3

O

O

OCH3

CH3

O

- HClO

+ H2O

OH

CH3

OH

red

HO

O

O

H3C

COOCH3

Dimer and

polymers

+ ClO2

O

OCH3

H3C OClO

- HClO2

O

OCH3

CH2

OH

OCH3

CH2OH

+ H2O

2 x

Bis-creosol 17

OH

OCH3

H2C

+ HClO2

OClO

OH

OCH3

CHO

- HClO

OH

OCH3

OH

H3CO

CH3

+ creosol

Scheme 7.24 Reactions of chlorine dioxide with creosol (from Ref. [1]).

The methylated analogue of creosol, the 4-methylveratrole, represents a simple

model for nonphenolic structures in lignin, and reacts with chlorine dioxide at a

much lower rate (the rate constant, k, is about seven orders lower, which illustrates

the pronounced preference of chlorine dioxide for phenolic substrates [1])

than its phenolic counterpart. The reaction pathways starting from the two meth-

7.4 Chlorine Dioxide Bleaching 747

OCH3

OCH3

CH3

+ ClO2

+

OCH3

OCH3

CH3

+

OCH3

OCH3

CH3

+

H3CO

OCH3

CH3

+

H

+ ClO2 + ClO2

+ ClO2

OCH3

OCH3

CH3

+

H

OCl O

- HClO

- CH3OH

- H+

+ H2O

OCH3

O

CH3

O

H3CO

OCH3

CH3

+

O ClO

- HClO

- H+ H2O +

H3CO

OCH3

CH3

O

O

OCH3

OCH3

H3C

+

OCH3

OCH3

CH3

+

H

OCH3

OCH3

H3C

+

O ClO

- HClO2

- H+ H2O +

OCH3

OCH3

H3C O

- HClO

- CH3OH

+ ClO2

+ H2O

OCH3

O

H3C O

O

- HClO2

+ CH3OH

OCH3

OCH3

H3C

+

OCH3

- CH3OH

- H+ + H2O

O

OCH3

H3C OCH3

OCH3

OCH3

CH3

+

H

OCl O

+ H2O - HClO

H3CO

OCH3

CH3

+

H

O OH

- CH3OH

- H+ H2O +

H3CO

O

CH3

H

HO O

H3CO

O

CH3

Cl

Cl O

oxid. and

chlorination

reactions

HO

Scheme 7.25 Reactions of chlorine dioxide with creosol

methyl ether (4-methylveratrole) (adapted from Ref. [1]).

oxonium ions (26) are shown in Scheme 7.25. Electrophilic attack of chlorine dioxide

to the unsubstituted para-position (27 left) relative to the methoxyl group, followed

by elimination of hypochlorous acid and hydrolysis of the methyl aryl ether

group affords the para-quinone (29). Chlorine dioxide attack on a carbon bearing

748 7Pulp Bleaching

a methoxyl group yields compound 30. In the presence of water the intermediate

chlorous ester (30) undergoes heterolytic fragmentation and ring cleavage giving

rise to 3-methylmuconic acid dimethyl ester (31). Hydrolysis of the chlorous ester

intermediate 32, and rearrangement forms an oxirane (33) that is further oxidised

to oxirane (34). Alternatively, methanolysis of 32, in a methanol-containing solvent,

followed by hydrolysis of the methyl aryl ether bond, gives rise to the formation

of the para-quinol methyl ether (36). A chlorine dioxide attack on an unsubstituted

carbon atom ortho to a methoxyl group (27 right), followed by heterolytic

fragmentation, leads to ring opening with formation of an oxo carboxylic acid

ester (39) which, in a series of oxidation and chlorination reactions, is converted

into the dichloro-hydroxy-a-keto ester (40) [1].

4-Methyl-2,3′,4′-trimethoxydiphenyl ether (Scheme 7.26; 41) served as a model

for native diaryl ether structures (unaffected during pulping) or for diaryl ether

structures, arising by oxidative coupling during bleaching [2]. Electrophilic attack

takes place preferentially on the aromatic moiety of the diaryl ether which is substituted

by three activating ether groups, giving rise to the corresponding oxidation

products (44, 47, 50, and 51). The modes of formation of these cleavage products

are analogous to those of other nonphenolic models, such as those shown in

Scheme 7.25. Moreover, muconic acid esters (e.g., 31; Scheme 7.25), monochloromuconic

acid ester, a lactone (e.g., 19; Scheme 7.24) and quinolmethylether (e.g.,

36; Scheme 7.25) are formed [2].

Under weakly acidic or neutral conditions, veratrylglycerol-b-guaiacyl ether

(Scheme 7.27; 52), a nonphenolic residual lignin structure of the b-aryl ether type,

undergo (in part) oxidation by chlorine dioxide to form the corresponding a-keto

structure (58), and in part also oxidative cleavage of the Ca–Cb bond to yield the

corresponding aromatic aldehyde (e.g., veratrylaldehyde 56) [2]. Both reactions follow

the general course via the initial radical cation intermediate shown in Scheme

7.23. The Ca–Cb cleavage may be considered to involve homolytic fragmentation

of the radical cation. This is analogous to the reactions of nonphenolic b-aryl ether

structures with other reagents of the radical type, such as hydroxyl radicals during

oxygen bleaching (see Scheme 7.12; Oxygen delignification, path B).

Structures of the stilbene and vinyl ether type (see Oxygen delignification,

Table 7.9) were found to be more resistant to chlorine dioxide oxidation. Chlorine

dioxide reacts only with the double bonds between the aromatic moieties, however

extensive oxidative cleavage of the double bond did not occur and no ring-opening

products were detected [3]. The initial reaction steps involved are the formation of

intermediary cation radicals and their reaction with the oxidant, which are analogous

to those observed when chlorine dioxide reacts with the aromatic nuclei

(e.g., Scheme 7.23). The subsequent reactions of ring-conjugated structures with

ClO2 differ from those of aromatic nuclei. The attack at the unsaturated side

chains may be due to the high electron density at the b-carbon atom(s) in conjugated

systems and the deactivating effect on the reactivity of aromatic nuclei

exerted by the original conjugated double bonds [3].

The reaction between chlorine dioxide and different ligninmodel compounds (phenolic

and nonphenolic, with or without an alpha-hydroxyl group), when studied

7.4 Chlorine Dioxide Bleaching 749

+ ClO2 + ClO2 + ClO2

- HClO2

- H+ H2O +

+

- CH3OH

O

OCH3

CH3

OCH3

OCH3

O

OCH3

CH3

H3CO

OCH3

O

OCH3

CH3

OCH3

OCH3

O

OCH3

CH3

OCH3

OCH3

H

OClO

- H+

+

O

OCH3

CH3

OCH3

OCH3

OClO

- HClO

- CH3OH

+ H2O

O

OCH3

CH3

OCH3

O

O

OClO

+ H2O

- H+

O

OCH3

CH3

H3CO

OCH3

+

OClO

OH

- HClO

O

OCH3

CH3

H3CO

OCH3

O

O

OClO

O

OCH3

CH3

H3CO

OCH3

OH

OH

OH

OCH3

CH3

O

OCH3

O

Scheme 7.26 Reactions of chlorine dioxide with 4-methyl-

2,3′,4′-trimethoxy-diphenyl ether (from Ref. [2]).

750 7Pulp Bleaching

H3CO

OCH3

OCH3

- H

- H+

CHOH

HC O

CH2OH

+ ClO2, + H+

- HClO2

H3CO

OCH3

OCH3

CHOH

HC O

CH2OH

+

H3CO

OCH3

OCH3

CHOH

HC O

CH2OH

H3CO

OCH3

OCH3

HC

HC O

CH2OH

+

O H

+

- H+

OCH3

OCH3

CHO

+

H3CO

OCH3

OCH3

CO

HC O

CH2OH

Scheme 7.27 Homolytic fragmentation and oxidation in the

a-position of veratryl-b-guaiacyl ether (52) on treatment with

chlorine dioxide (from Ref. [2]).

under the effective elimination of hypochlorous acid by sulfamic acid during chlorine

dioxide treatment [4], showed that the reaction between ClO2 and lignin

model compounds is generally characterized by three independent parallel reactions:

(a) demethylation (demethoxylation [20]); (b) formation of 2-methoxy- p -quinone;

and (c) formation of muconic acid monomethyl ester and/or its derivatives

[15,18,19]. Nonphenolic lignin model compounds do react with ClO2 when ClO2 is

supplied in large excess [1,2,4]. These conditions are not representative of industrial

ClO2 application levels; therefore, the presence of free phenolic lignin is

thought to be a critical lignin component needed to increase oxidation efficiency

during pulp bleaching. However, recently Svenson et al. [zz] showed that the

7.4 Chlorine Dioxide Bleaching 751

removal of phenolic hydroxyl groups via pulp methylation did not adversely affect

the chlorine dioxide bleaching efficiency or the amount of chlorate formed during

exposure to chlorine dioxide. Due to the effective elimination of hypochlorous

acid, no chloroaromatic material could be detected [4], or can be substantially

reduced [21]. This supports the view that the reaction intermediate hypochlorous

acid (and chlorine) is solely responsible for the formation of chloro organic material

during chlorine dioxide bleaching [4,5]. Without elimination of the hypochlorous

acid formed during chlorine dioxide bleaching, several chlorination products

of all model compounds studies have been found [1–3]. Although alkaline decomposition

of chlorine dioxide has a complex behaviour and is not very well understood

[31], it should be mentioned that increasing pH (although decreasing reactivity)

leads to decreased formation of chlorinated organics [29].

Chlorine dioxide delignification (D0) preferentially oxidizes phenolic entities to

both quinonoid and muconic acid structures modifying kraft residual lignin [15],

indicating that quinones are significant reaction products formed in preference

over muconic methyl esters during D0 stage [4]. The amount of phenolic groups

of unbleached residual lignin is about 30–50% of all the phenylpropane units.

Kinetic studies with model compounds have demonstrated that ClO2 preferentially

oxidizes these phenolic groups orders of magnitude faster than nonphenolic

entities [4,22,23]. Further, differences in the reactivity of phenolic compounds are

observed and dependent on structural details [24]. Thus, it is generally accepted

that ClO2 will preferably react with these phenolic groups during D0 delignification

[4]. In general, these reaction products (quinonoid and muconic acid structures)

are generally resistant to further oxidation by ClO2. It is suspected that the

formation of these chromophores during bleaching, and their slow elimination

during later bleaching stages might explain why various bleaching sequences

encounter brightness ceilings, and why different bleach sequences are more efficient

at reaching higher brightness targets than others [15]. Alkali extraction (E

stage), in addition to removing solubilized lignin and saponifying muconic acid

methyl esters, reactivates the residual lignin towards ClO2 oxidation [13]. It

appears that the E stage behaves like a reductive bleaching stage, similar to that of

a Y stage (sodium hydrosulphite bleaching stages), which presumably results in

the aromatization of quinones to polyhydric phenols. Chlorine dioxide oxidation

of D0E and D0Y treated pulps generally afforded quinonoid structures onto the oxidized

lignin, like that of the D0 stage, which implies that polyphenols react with

ClO2 in a somewhat similar way as unbleached phenolic groups [13]. Clearly, the

formation of quinones during the ClO2 oxidation of phenolic and polyphenolic

moieties represents a significant reaction product. D0 stage quinones can be easily

re-activated towards ClO2 again upon alkali treatment [13].


Дата добавления: 2015-10-21; просмотров: 128 | Нарушение авторских прав


Читайте в этой же книге: Carry-Over | Selectivity of Oxygen Delignification | Process Technology | Parameters Units Low-alkali High-alkali | Parameters Units First stage Second stage | Pulp Quality | Introduction | Physical and Chemical Properties and Definitions | Inorganic Side Reactions during Chlorine Dioxide Bleaching of Wood Pulps | Generation of Chlorine Dioxide |
<== предыдущая страница | следующая страница ==>
Na2SO4 Cl2| Chlorination Products

mybiblioteka.su - 2015-2024 год. (0.06 сек.)