Студопедия
Случайная страница | ТОМ-1 | ТОМ-2 | ТОМ-3
АвтомобилиАстрономияБиологияГеографияДом и садДругие языкиДругоеИнформатика
ИсторияКультураЛитератураЛогикаМатематикаМедицинаМеталлургияМеханика
ОбразованиеОхрана трудаПедагогикаПолитикаПравоПсихологияРелигияРиторика
СоциологияСпортСтроительствоТехнологияТуризмФизикаФилософияФинансы
ХимияЧерчениеЭкологияЭкономикаЭлектроника

Threading Tools

There are different types of thread-cutting tools depending upon the operations to be performed. Thread-cutting tools are classified according to the work done into female screw-cutting tools and male screw-cutting tools.

According to their construction they are known as taps, nut taps (Fig.23), and threading dies. The tap used for cutting female threads in holes is made in the form of a screw provided mostly with straight grooves forming the cutting edges of the tool. The tap made of a steel cylindrical bar stock consists of the working part and shank.

The shark serves for fastening the tap in a chuck or in a tap wrench (Fig.24).

Threads can be cut by means of taps either by hand of on a machine. With manual tapping usually a set of two or three taps is used. The first tap serves for cutting threads; then the third tap is applied for final thread cutting. With mechanical tapping in such materials as cast iron, bronze. Blass, copper, aluminium, etc. once tap is used. When steel is tapped sometimes a set of two tools is used. Before cutting threads the tap should be set so that its axis strictly coincides with that of the hole to be cut, otherwise the thread may be oblique. To cut male threads such an instrument as a threading die is used, which is held in the die holder (Fig.25).

 

 


Дата добавления: 2015-08-13; просмотров: 46 | Нарушение авторских прав


<== предыдущая страница | следующая страница ==>
По английскому языку| Drills and Drilling

mybiblioteka.su - 2015-2024 год. (0.006 сек.)