Студопедия
Случайная страница | ТОМ-1 | ТОМ-2 | ТОМ-3
АвтомобилиАстрономияБиологияГеографияДом и садДругие языкиДругоеИнформатика
ИсторияКультураЛитератураЛогикаМатематикаМедицинаМеталлургияМеханика
ОбразованиеОхрана трудаПедагогикаПолитикаПравоПсихологияРелигияРиторика
СоциологияСпортСтроительствоТехнологияТуризмФизикаФилософияФинансы
ХимияЧерчениеЭкологияЭкономикаЭлектроника

Thread repair

Читайте также:
  1. A Apply a thread-lock to the bolt
  2. Clean cut upgrade empty paint repair tighten
  3. G. Performance Score: Threaded Solos
  4. Maintenance and minor repair tools
  5. Pop Fly Thread (Gag)
  6. REPAIRS AND OVERHAUL
  7. Routine of the operating system is run on that processor to select the next thread.

 

• Threads (particularly those In aluminium alloy components) can be damaged by overtightening, being assembled with dirt in the threads, or from a component working loose and vibrating. Eventually the thread will fail completely, and it will be impossible to tighten the fastener.

• If a thread is damaged or clogged with old locking compound it can be renovated with a thread repair tool (thread chaser) (see illustrations 2.22 and 2.23); special thread


 

A thread repair tool being used to correct an external thread

 

chasers are available for spark plug hole threads. The tool will not cut a new thread, but clean and true the original thread. Make sure that you use the correct diameter and pitch tool. Similarly, external threads can be cleaned up with a die or a thread restorer file (see illustration 2.24).

Using a thread restorer file

 

It is possible to drill out the old thread and retap the component to the next thread size. This will work where there is enough surrounding material and a new bolt or screw can be obtained. Sometimes, however, this is not possible - such as where the bolt/screw passes through another component which must also be suitably modified, also in cases where a spark plug or oil drain plug cannot be obtained in a larger diameter thread size.

• The diamond-section thread insert (often known by its popular trade name of Heli-Coil) is a simple and effective method of renewing the thread and retaining the original size. A kit can be purchased which contains the tap, insert and installing tool (see illustration 2.25). Drill out the damaged thread with the size drill specified (see illustration 2.26). Carefully retap the thread (see illustration 2.27). Install the


 


2.27... tap a new thread.

To install a thread insert, first drill out the original thread...

2.28... fit insert on the installing tool...

And thread into the component..,


 



A thread repair tool being used to correct an internal thread



Дата добавления: 2015-10-29; просмотров: 158 | Нарушение авторских прав


Читайте в этой же книге: Coolant temperature gauge | Note the alignment marks between the housing and the covers (arrowed) | Bulbs, with brightness varying considerably | Fit the clutch pushrod if removed | B ... then install the cover | REPAIRS AND OVERHAUL | Models covered | Maintenance and minor repair tools | The workbench | Dust, eye and hand protection |
<== предыдущая страница | следующая страница ==>
Nuts and split pins| And sealing compounds

mybiblioteka.su - 2015-2024 год. (0.007 сек.)