Студопедия
Случайная страница | ТОМ-1 | ТОМ-2 | ТОМ-3
АвтомобилиАстрономияБиологияГеографияДом и садДругие языкиДругоеИнформатика
ИсторияКультураЛитератураЛогикаМатематикаМедицинаМеталлургияМеханика
ОбразованиеОхрана трудаПедагогикаПолитикаПравоПсихологияРелигияРиторика
СоциологияСпортСтроительствоТехнологияТуризмФизикаФилософияФинансы
ХимияЧерчениеЭкологияЭкономикаЭлектроника

Good ventilation is essential to have good drying and curing conditions.

Читайте также:
  1. Adaptations of organisms to the environment conditions.
  2. Advocacy for Essentialist Gene Models for Psychiatry
  3. Chapter 4: Be Yourself Better: Why Passion And Conviction Are Essential To Inspiring Leaders
  4. Clearly there is a change in slope in two of the curves. Such a change has been found for essentially all metals studied to date.
  5. Cracks in the Essentialist Image of the Gene
  6. Curing test of Zinc ethyl silicate with MEK. ASTM. D4752-87.
  7. Early Evidence on the Plausibility of Essentialist Gene Models for Psychiatry

 
 

Good practice

 

 
 

Bad practice

 

 

Salts and contaminants

Salts, oil, grease, dust, abrasive and other contaminants that can precipitate on the surface to be painted must be avoided. Contaminants can come with the atmosphere (marine and industrial) or by other work / trades carried out close by. To prevent contamination of the surface the surfaces to be painted must be sealed off. Any existing salt must be washed away with fresh water and other contaminants such as oil and grease, with a suitable detergent.

 

· Salt may cause osmotic blistering

· Oil and grease will give reduced adhesion between the substrate and the paint

 

Safety aspects during application

 

Because airless spray systems operate at high pressure you need to give special attention to safety during operation. Two safety considerations are paramount:

 

· Fluid sprayed from the gun is propelled with sufficient force to penetrate a mans skin and cause very serious damage.

· The entire system is pressurised so that hose ruptures or leaks at fittings can result in dangerous high pressure spray.

 

Some important safety practices should always be born in mind:

 

· Never point the gun at any part of your own body or at another person.

· Do not make adjustments to the equipment set-up, such as changing nozzles or fittings without first shutting off the pump, releasing the system pressure and securing the gun.

· Do not remove the tipguard during operation. The tipguard is there so that you cannot put your finger close to the tip and inject paint under your skin.

· Always engage the trigger lock when the gun is not being used.

· Always make sure the fluid hose is in good condition before spraying.

· Do not use standard hardware on an airless system; only high pressure fittings.

· High pressure hose is required for fluid flow. The hose must never be bent or kicked.

· Airless spray equipment must be grounded to prevent static sparking.

· Do not spray solvent through the nozzle tip because this can build up static electricity and cause explosion or fire.

 

Figure 7.7.

 
 

Ailess spraying can be dangerous


Дата добавления: 2015-10-26; просмотров: 145 | Нарушение авторских прав


Читайте в этой же книге: История флага США | Использование Большой печати США | Novus Ordo Seclorum | Памятники Дяде Сэму |
<== предыдущая страница | следующая страница ==>
Brush application| Невидимые враги

mybiblioteka.su - 2015-2024 год. (0.006 сек.)