1. Start the CASP Utility Program, using the Left Mouse button Select “Start CASP Utility” as shown in Figure 1. The CASP utility will start as shown in Figure 2.

Resetting the CASP.

1. Start the CASP Utility Program, using the Left Mouse button Select “Start CASP Utility” as shown in Figure 1. The CASP utility will start as shown in Figure 2.

Figure 1 – Start the CASP utility.

Figure 2 – The CASP Utility.

Note: Figure 2 shows the CASP connected the message shown in Figure 3 may appear if the CASP is not connected.

Figure 3 – Unable to connect to CASP message.

3. Check Allow Data Loss as shown in Figure 4.

Figure 4 – Allow Data Loss Checked.

4. Press “Reset CASP”

5. Warning will appear stating all data on CASP will be lost as shown in Figure 5, Press Yes.

Figure 5 – Warning – All Data will be deleted on CASP.

After pressing Yes the CASP will be reset.

6. Stop the RTE as shown in Figure 6 using the left mouse button.

Figure 6 – Stopping the RTE

7. Start the RTE as shown in Figure 7 using the left mouse button.

Figure 7 – Starting the RTE.

Дата добавления: 2015-10-21