Читайте также:
|
You haven’t installed according to the steps in front, while you has inserted the control-card in front of installment the software. Such computer prompt you to install the driver of the control-card after computer started. By now, please cancel the installation process of the driver and install the Ncstudio™ software. After restarted the system, the installment of the driver can complete automatically
2.4 uninstall the Ncstudio™ system
If you want to delete the Ncstudio™ system, please do not delete the installment folder of this software directly, but should carry out the deletion procedure to the unloading work. This has two methods to start the deletion procedure.
The first method, find “unloads Ncstudio V5.4.42” the menu item directly from the installment menu, Chooses and carries out.
The second method, clicks “start” -> “setting” -> “control panel”, after starts “the control panel”, finds the “add/delete” icon, double-click and execution, chooses “unloads the Ncstudio V5.4.42” from the list frame appeared, Then press the “add/delete” button in below of dialog box. Start the deletion procedure. The Windows pop-ups dialog box in following. Clicks the next step, the system delete the Ncstudio automatically from the system.
After clicked the “complete” button, whole unloading process ended.
Attention:
The unloading process above basis different edition different, the content gave supplies only the reference
2.5 the Connection of Ncstudio™ Control-card and driver system
The signal of the Ncstudio™ mechanical movement control through the control-card which inserted in the extend plot, realizes the communication between the Ncstudio™ software system and the feed motor-drivers system which was installed in the electricity gas tank of the engine bed.
Before the connection of the Ncstudio™ control-card and motor-driven system, you should installed first the engine bed and the electricity gas tank, uses the special electric cable connect the plug on the control-card to the corresponding plug on the electricity gas tank, Then, the connection of the control-card and the motor-driven system have completed.
How connect the card and the electrical gas system, please refer to the booklet of the card idiographic edition.
The different edition possible work with the different model, the function provided is different also.
3.Ncstudio™ Basic concept
Дата добавления: 2015-11-14; просмотров: 61 | Нарушение авторских прав
| <== предыдущая страница | | | следующая страница ==> |
| Operating system | | | Operation pattern and status |